Pull Latch .. NO BEEP!

kate616 · Post by **kate616** » Tue Mar 08, 2005 11:02 am

Hi All

Having problems getting roof down. When I pull latches no beep sound ... Any ideas??

Dan · Post by **Dan** » Tue Mar 08, 2005 11:05 am

just double checking but have you turned the key and pulled the screen across in the boot?

kate616 · Post by **kate616** » Tue Mar 08, 2005 7:34 pm

Yeah doin same things as last summer when it worked (pull screen across, engine on, pull latch..) but no beep noise. The windows go up and down no problem.

marcelnl · Post by **marcelnl** » Tue Mar 08, 2005 8:02 pm

Hi All

Having problems getting roof down. When I pull latches no beep sound ... Any ideas??

one of the many microswitches perhaps, I'd start at the one in the boot checking the cover is closed...

kate616 · Post by **kate616** » Thu Mar 10, 2005 10:55 am

Ive looked at switch in boot and it appears to be working ok. I was wondering if it could be a fuse? Do we know if the roof has a designated fuse as it doesnt say so in the owners manual

tomasz-206 · Post by **tomasz-206** » Wed Jun 28, 2006 12:03 am

When I pull latches no beep sound Please help me i have the same problem i can't open the roof. I can't go to servise because I'm from Poland. There's no good workshop in my town and nobody knows what's wrong with my pug. PLEASE HELP

Post by **Lyndon** » Wed Jun 28, 2006 8:14 am

have you made sure the roller blind cover in the boot is pulled towards the rear of the car ???

tomasz-206 · Post by **tomasz-206** » Wed Jun 28, 2006 9:42 am

have you made sure the roller blind cover in the boot is pulled towards the rear of the car ???

YES

please help

tomasz-206 · Post by **tomasz-206** » Thu Jun 29, 2006 9:42 am

Please HELP

lastvts · Post by **lastvts** » Fri Jun 30, 2006 12:35 am

If my memory serves me correctly there are micro switches in the handles. One of these may have become disconnected or damaged. The micro switch is possibly just stuck closed. Mark the location of the handles with tipex should you have to remove them. The micro switches are pretty inexpensive, but it will probably just be a case of bending them back in to position.