pics and diagrams be great.thank you
cylinder Head
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
cylinder Head
any one got the cylinder Head torque setting (got new head bolts) for my pug? see siggy,
pics and diagrams be great.thank you
pics and diagrams be great.thank you
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Re: cylinder Head
I assume you have the SOHC engine with an aluminium block.
If so Haynes says,
Lubricate the threads and underside of the heads of the cylinder head bolts lightly with clean engine oil.
Stage 1 20 Nm (15 lbf ft)
Stage 2 Angle tighten a further 240 degrees
Work progressively and (looking from the front of the car as you are working) in sequence starting at the rear centre bolt then front centre bolt, then working outwards front bolt to left of centre, then rear bolt to left of centre, then rear bolt to right of centre, then front bolt to right of centre, then left front bolt, then left rear bolt, then right hand rear bolt and finally right hand front bolt.
Better still invest in Haynes manual no. 4613. Well worth the £15 or so that it will cost you if you buy from the right place.
If so Haynes says,
Lubricate the threads and underside of the heads of the cylinder head bolts lightly with clean engine oil.
Stage 1 20 Nm (15 lbf ft)
Stage 2 Angle tighten a further 240 degrees
Work progressively and (looking from the front of the car as you are working) in sequence starting at the rear centre bolt then front centre bolt, then working outwards front bolt to left of centre, then rear bolt to left of centre, then rear bolt to right of centre, then front bolt to right of centre, then left front bolt, then left rear bolt, then right hand rear bolt and finally right hand front bolt.
Better still invest in Haynes manual no. 4613. Well worth the £15 or so that it will cost you if you buy from the right place.
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: cylinder Head
thank you for taking the time to post this 
as this is my boys car ill get him to buy 1,
as this is my boys car ill get him to buy 1,
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: cylinder Head
Here is the pic of What Grandadmonkey has posted.
You do not have the required permissions to view the files attached to this post.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: cylinder Head
also while im here.
when i removed the rocker cover theres a plate over the rocker shaft when i removed that there was what looks like a spacer but only found one of them, now does this go on just one side if so what side or is one missing?
pic is just what i need thank you.
when i removed the rocker cover theres a plate over the rocker shaft when i removed that there was what looks like a spacer but only found one of them, now does this go on just one side if so what side or is one missing?
pic is just what i need thank you.
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: cylinder Head
Not sure. Been a while since I touched one of those. Got a pic?
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: cylinder Head
Capncol wrote:Here is the pic of What Grandadmonkey has posted.
the arrow is that pointing to bulk head? if so photo will be wrong way round, just i so know
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: cylinder Head
Arrow denotes front of car (ring gear shows on r/h side of engine when viewed from front)
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm