Can any one help and tell me where i can
buy roof oil. (Aral Vitamol ZMH Oil)
my dealer can't seem to find it on the system.
Thanks
Roof Oil Need1
-
cheekee
- Posts: 147
- Joined: Wed Aug 12, 2009 3:13 pm
I have the oil and on the peugeot sticker the part number is:
9735.57
Hope this helps.
If you are buying to top up youre system and you know how do to it please can you let me know as I want to top mine up at some point. It tells you how to do it in the repair guide on this site but it didnt work. It says to remove a bolt on the side of the pump and inject the oil into the resulting hole, I tried using a large syringe but the oil wouldnt go in. I wonder if you have to release the hydraulic pressure by using the allen key as in when using the manual roof operation procedure.
9735.57
Hope this helps.
If you are buying to top up youre system and you know how do to it please can you let me know as I want to top mine up at some point. It tells you how to do it in the repair guide on this site but it didnt work. It says to remove a bolt on the side of the pump and inject the oil into the resulting hole, I tried using a large syringe but the oil wouldnt go in. I wonder if you have to release the hydraulic pressure by using the allen key as in when using the manual roof operation procedure.
Last edited by cheekee on Tue Jun 22, 2010 4:30 pm, edited 1 time in total.
-
mgtf 2 206cc
- Posts: 6
- Joined: Fri Jan 22, 2010 1:51 am
hello , i posted the same kind of post months back no one helped , i had the same problem , anyway i finally fixed mine sooo happy well my dad fixed it ,
my roof wouldnt open or shut as the hydrillic fuild was too low and was leaking , all he did was went peugeot and brough the oil cost around £11.00 then removed all the casing the the boot , you will see once the casing get removed you have a little box thing on the right hand side undo it and you will see the pot of oil , u have to the metel thing around it or u can get a serfing and it will take ages its up to u , either way it will make the roof work once it has been filled up ..
i no how you feel i was stressing for months now its fixed and works better than before
hope that helps
and couldnt believe how easy it was
Online
my roof wouldnt open or shut as the hydrillic fuild was too low and was leaking , all he did was went peugeot and brough the oil cost around £11.00 then removed all the casing the the boot , you will see once the casing get removed you have a little box thing on the right hand side undo it and you will see the pot of oil , u have to the metel thing around it or u can get a serfing and it will take ages its up to u , either way it will make the roof work once it has been filled up ..
i no how you feel i was stressing for months now its fixed and works better than before
hope that helps
and couldnt believe how easy it was
Online
-
steve8621
- Posts: 14
- Joined: Thu Apr 29, 2010 7:47 pm
-
GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Why not post it on a new thread on here Steve and I'll make it sticky. That way anyone can make quick reference to it. That would be really useful, thank you.steve8621 wrote:Hey.
All sorter works fine and faster too.
If you go to your dealer ask them to print you off how to fill you oil its easy and rather quick +
easy to understand. If you get no look as some dealers are like that ill give you my number and will tell you how
to do it just let me know.
Cheers Ste
Ron
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
-
samplingthegoods
- Posts: 1
- Joined: Wed Jul 21, 2010 11:37 am
Can anyone help my daughter has a 206 cc the roof doesnt work i was told the pump was faulty so i changed the pump i filled the pump with oil by taking off the white plastic cap that is fitted around the bottom of the pump....When you unclip the roof locks and press the button for the roof to go down all the windows go down as the should then after a few moments it makes the beeping noise as if the roof has gone through the motions of opening but the roof hasnt moved.....has this got anything to do with the oil is there a certain way you need to refill the oil or bleed the system or has anyone got the number of someone who will fix this and not rip me off PLEASE CAN ANYONE HELP I live in Rainham essex
Thanks
Thanks
Last edited by samplingthegoods on Wed Jul 21, 2010 12:04 pm, edited 1 time in total.
-
cheekee
- Posts: 147
- Joined: Wed Aug 12, 2009 3:13 pm
Possible things to try.
- Has the roof been used manually. watch the following video to check if the catches are in the right position for automatic mode.
http://www.peugeot206cc.co.uk/uploads.p ... vid-04.avi
- Try resetting the roof mechanism by looking in the fuse box below steering wheel and removing and refitting what looks like a fuse in fuse slot no 1. Its called shunt. It will reset the roof ecu as the ecu may be confused to what position the roof is in.
- Have you checked on the pump that the allen bolt that you loosen in a manual roof proceedure has been tightened. If not there will be no hydraulic pressure.
_ Check all connections are secure to the new pump from the ecu.
- check fuse for roof mechanism. (should be in youre manual which one it is as I dont know the year of youre car).
- Possible microswitch fault.
If these dont work it sounds like your hydraulic system needs to be bled/looked at and that im afraid is a peugeot job.
The official peugeot manual states you should do the "load reduction" proceedure before removing the hydraulic lines. I have no idea what this is but it may well have had an effect now.
http://www.peugeot206cc.co.uk/repair-20 ... ig14f3.htm
Is the new pump secondhand. Maybe a very slight possibilty that it is faulty as well.
Who told you in the first place that the pump was faulty.
- Has the roof been used manually. watch the following video to check if the catches are in the right position for automatic mode.
http://www.peugeot206cc.co.uk/uploads.p ... vid-04.avi
- Try resetting the roof mechanism by looking in the fuse box below steering wheel and removing and refitting what looks like a fuse in fuse slot no 1. Its called shunt. It will reset the roof ecu as the ecu may be confused to what position the roof is in.
- Have you checked on the pump that the allen bolt that you loosen in a manual roof proceedure has been tightened. If not there will be no hydraulic pressure.
_ Check all connections are secure to the new pump from the ecu.
- check fuse for roof mechanism. (should be in youre manual which one it is as I dont know the year of youre car).
- Possible microswitch fault.
If these dont work it sounds like your hydraulic system needs to be bled/looked at and that im afraid is a peugeot job.
The official peugeot manual states you should do the "load reduction" proceedure before removing the hydraulic lines. I have no idea what this is but it may well have had an effect now.
http://www.peugeot206cc.co.uk/repair-20 ... ig14f3.htm
Is the new pump secondhand. Maybe a very slight possibilty that it is faulty as well.
Who told you in the first place that the pump was faulty.
Last edited by cheekee on Wed Jul 21, 2010 2:54 pm, edited 1 time in total.
-
Michael59
- Posts: 29
- Joined: Wed Sep 11, 2013 8:13 am
- Location: Palermo - Italy
Re: Roof Oil Need1
Hi to all!
I recently had to buy the Aral Vitamol ZMH oil from my local Peugeot dealer and when I told them I needed the oil with part number 9735.57 they told me that the part number is not correct for the 206cc, that it is the oil for the Peugeot 205... so they looked it up and ordered for me the oil with part number 9734 NO instead. When it arrived I noticed that it was a little bottle of only 125ml (very expensive, almost €20) and all that was written on the bottle was:
9734 NO - PRO - Oil for hydraulic systems - Peugeot Citroen Automobiles - 125ml - http://www.quickfds.com - Made in France, Properties: High viscosity index, Anti-wear, Thermal stability, Resistance to oxidation, Anti-corrosion, Anti-foaming, Neutrality to elastomers.
Since I had a leakage in my hydraulic system because of a faulty strut and already fixed that, I now am in need to order a bottle of oil again and I wondered if there are other possibilities... Can anyone suggest me if I could use other types of oils and where I could find (order and buy) it cheaper?
Could I use the less expensive oil 9735.57 instead?
Please let me know your suggestions, many thanks in advance!
I recently had to buy the Aral Vitamol ZMH oil from my local Peugeot dealer and when I told them I needed the oil with part number 9735.57 they told me that the part number is not correct for the 206cc, that it is the oil for the Peugeot 205... so they looked it up and ordered for me the oil with part number 9734 NO instead. When it arrived I noticed that it was a little bottle of only 125ml (very expensive, almost €20) and all that was written on the bottle was:
9734 NO - PRO - Oil for hydraulic systems - Peugeot Citroen Automobiles - 125ml - http://www.quickfds.com - Made in France, Properties: High viscosity index, Anti-wear, Thermal stability, Resistance to oxidation, Anti-corrosion, Anti-foaming, Neutrality to elastomers.
Since I had a leakage in my hydraulic system because of a faulty strut and already fixed that, I now am in need to order a bottle of oil again and I wondered if there are other possibilities... Can anyone suggest me if I could use other types of oils and where I could find (order and buy) it cheaper?
Could I use the less expensive oil 9735.57 instead?
Please let me know your suggestions, many thanks in advance!