Fuse box layout different to the manual

tigertina · Post by **tigertina** » Wed Jan 18, 2006 5:48 pm

Help, My husband fitted a reversing kit to my 4 year old 206CC. Shortly afterwards the drivers side headlight blew (new bulb) then the radio permanent feed disappeared so the radio no longer remembers the code or station settings and now the drivers side sidelights have stopped working.

All the fuses are Ok but the owners manual shows a different layout to the car. Removing the reversing kit did not fix it. Cannot buy a Haynes manual and nobody on the web seems to have the wiring diagrams or the fuse box layout.

Can anyone help or is it off to the garage I go

reap · Post by **reap** » Thu Jan 19, 2006 8:18 pm

which fuse box you want?
you have bm34 under bonnet or bh28 in car?
does the roof still wrx?.

tigertina · Post by **tigertina** » Fri Jan 20, 2006 12:30 pm

It's the interior fuse box. My Mum's standard 206 manual shows the correct under bonnet fuse box layout but is wrong for the underdash fuse box. Don't know what bm34/bh28 means, how do I tell?

The roof works fine, leaks like a sieve at the joints

but this weekend is a silicon grease and silicon sealant play time

as per documents found on this site. I will report on the success.

Many thanks
Tina

tigertina · Post by **tigertina** » Sat Jan 21, 2006 1:49 pm

Problem fixed. Went to the local Peugeot dealer and they got the technical reference manual out and worked out 2 fuses had been put back incorrectly. The guy could not do it using the owners manual so I would still like a proper diagram if anyone has one. I'm going to take a picture of the fuse box to make sure this doesn't happen again