Cam cover came off.

All your other probs if any.
Andy-W
Posts: 136
Joined: Tue Jan 14, 2003 2:40 pm
Location: Surrey

Post by Andy-W »

Bit of advice for all 2.0 owners. Today on the way to work I heard a load clicking from my engine. I pulled over stopped the engine and investigated. To my horror found that the plastic cover over the cambelt and pulleys had come loose and started fouling on the belt :!: Towed the car to my local monkeys and have insisted on a full check and new cambelt and cover. Asked and found out they have seen 4 others with the same problem, the screws come loose and let the cover fall onto the belt. :!:
You will need an allen key to tighten them up and they are a pain to get to, but if my cover had come off on the motorway and not in traffic on the way to work it would have killed the engine.
Top
charlieannear
Posts: 482
Joined: Tue Apr 08, 2003 4:01 pm
Location: Poole, Dorset (Cornish abroad)

Post by charlieannear »

Cheers Andy, better check that this evening!
Now, where's the bonnet release catch... ;)
Just because you're paranoid, it don't mean they're not after you.

[url=http://www.peugeot206cc.co.uk/newowners?id=465]Owner 465
[color=red] 03, 2.0 SE Black/Silver limited Edition, (Black paint, black/red Leather interior, sports pack, luxury mats, Boot rack) plus boot tray and Clarion 6-disc CD autochanger
Extras: Aluminium hoops, aluminium tax disc holder, Conmatic, Griffiths Quickshift[/color][/url]
Top

Return to “Other”