What oil do the factory put in?

Anything related to the 206CC
carl
Posts: 706
Joined: Mon Jun 24, 2002 1:00 am
Location: East Herts

Post by carl »

Our CC is getting a little low on oil and needs a top up. I'm usually not keen on mixing different oil weights, but more importantly mixing synth/semi-synth/mineral.

Does anyone know whether it comes from the factory with synthetic or semi-synthetic? I have some Redline 5W/30 fully synth -- will that be OK to top up with?
[url=http://www.peugeot206cc.co.uk/newowners?id=442]Ex owner number 442[/url]

Huu
Posts: 433
Joined: Wed Oct 02, 2002 12:13 pm
Location: Sydney AU

Post by Huu »

in AU pug advertised as using Mobil 1 (fully synthetic). I stick with that when i need to top up myself.
[url=http://www.peugeot206cc.co.uk/newowners?id=376]Ex Owner 376[/url]

carl
Posts: 706
Joined: Mon Jun 24, 2002 1:00 am
Location: East Herts

Post by carl »

Well it's not the quality of the oil that's an issue (actually Redline is better than Mobil because it has polyol ester base stocks :)), more of its compatability with the existing stuff. The only reason I want to use the Redline is that I have a US quart of it which I use for filling up the TVR.
[url=http://www.peugeot206cc.co.uk/newowners?id=442]Ex owner number 442[/url]

WebCode
Posts: 202
Joined: Fri Jun 13, 2003 6:40 pm

Post by WebCode »

Its filled with 10W40 Semi.. as standard

I Use Castrol RS 10W60 now.. Fully synthetic..
For as long as but one hundred of us remain alive, we will never on any
condition submit to the domination of the English.
It is not for glory, nor riches, nor honours that we fight, but for freedom
alone, which no good man gives up except with his life. Arbroath 1320

clarelee
Posts: 130
Joined: Thu Mar 06, 2003 9:22 am
Location: Brisbane Australia

Post by clarelee »

in AU pug advertised as using Mobil 1 (fully synthetic). I stick with that when i need to top up myself.
In Brisbane our dealer supplied it and fills it with Castrol Magnetec when servicing, they even reccomend it an insert in the manual.

carl
Posts: 706
Joined: Mon Jun 24, 2002 1:00 am
Location: East Herts

Post by carl »

Its filled with 10W40 Semi.. as standard

I Use Castrol RS 10W60 now.. Fully synthetic..
That means I'll have to drain and refill with fully synth -- I can't just add the fully synth. It's a year old now (13k miles) so I reckon that despite what the manual says it's due an oil change.

I used to use Castrol RS 10W60 in the Impreza. Good for turbocharged engines (they knock the stuffing out of oil) but isn't it a bit thick for a normally-aspirated engine?

The other good oils are Motul 300V 15W/50 and any of the Redline or Amsoil ones. TVR dealer told me they fill the car with 5W/30 Shell Racing oil (which I can't get hold of) and Redline was the only one I could find that came in 5W/30. Seems a bit thin to me, but according to the blurb it's high-quality composition offers the same protection as other oils that are thicker :scratch:
[url=http://www.peugeot206cc.co.uk/newowners?id=442]Ex owner number 442[/url]

Alex LS
Posts: 1895
Joined: Sat Feb 16, 2002 1:00 am
Location: Slough, UK

Post by Alex LS »

in AU pug advertised as using Mobil 1 (fully synthetic). I stick with that when i need to top up myself.
In Brisbane our dealer supplied it and fills it with Castrol Magnetec when servicing, they even reccomend it an insert in the manual.
Magnatec's semi-synthetic though, at least in the UK...
"It is not an ordinary job. It is not like being manager of Aston Villa." - Gérard Houllier

[url=http://www.peugeot206cc.co.uk/newowners?id=386]Owner #386[/url] - [url=http://alexlslfc.users.btopenworld.com/pug/][u]My pug stuff[/u][/url]