MOT Time
-
rhume
- Posts: 84
- Joined: Fri Sep 28, 2018 4:58 pm
- Location: Durham
MOT Time
Well today it was in for pre-MOT. I asked them to look at bushing on front drivers as had a clunk and was loose on tight bends. Also back exhaust was blowing. all fixed so MOT tomorrow AM. Here's Hoping!!!!
-----------------------------------------------------------------------------------------
I find myself the owner of 2 silver Peugeots: 206cc Allure and a 4007 (7 seat 4x4)
I find myself the owner of 2 silver Peugeots: 206cc Allure and a 4007 (7 seat 4x4)
-
rhume
- Posts: 84
- Joined: Fri Sep 28, 2018 4:58 pm
- Location: Durham
Re: MOT Time
Well the MOT will be complete tomorrow. It has needed two new wishbones at the front. I knew it would need the drivers side as it had a clunk and it felt lose coming out of corners. The second one was a surprise and might have been the difference between doing the MOT and selling the car. At the point I found out I decided to just get it done. Could have done it myself but a bit tied up at the moment 
So it will live for another year. It's been a good workhorse and we have put a lot of miles on it 10 months since we got it.
So it will live for another year. It's been a good workhorse and we have put a lot of miles on it 10 months since we got it.
-----------------------------------------------------------------------------------------
I find myself the owner of 2 silver Peugeots: 206cc Allure and a 4007 (7 seat 4x4)
I find myself the owner of 2 silver Peugeots: 206cc Allure and a 4007 (7 seat 4x4)