05 206cc window
-
lisalou
- Posts: 1
- Joined: Sat Dec 21, 2013 5:31 pm
05 206cc window
my drivers side window doesnt go under the seal when i close the door the door closes fine though,and it goes under the seal if i open the window and close it again. i can push it under the seal once the door is closed. ive just bought this car so i dont really want to spend a huge fortune x
-
rfman
- Posts: 28
- Joined: Fri Dec 13, 2013 4:42 pm
- Location: Alloa Scotland
Re: 05 206cc window
Try putting a little silicon grease along the seal, that should help.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 05 206cc window
If rfman's suggestion doesn't do the trick, the door glass guide frame may need adjustment. I can tell you how if needed.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
rfman
- Posts: 28
- Joined: Fri Dec 13, 2013 4:42 pm
- Location: Alloa Scotland
Re: 05 206cc window
can you give me the instructions to adjust the window guide please? I was going to try adjusting the door on mine to see if it would fix the passenger window on mine.
It's OK, I found your answer /viewtopic.php?f=4&t=14869
It's OK, I found your answer /viewtopic.php?f=4&t=14869
-
rfman
- Posts: 28
- Joined: Fri Dec 13, 2013 4:42 pm
- Location: Alloa Scotland
Re: 05 206cc window
Carried out the adjustment today. It works well, and I adjusted the door striker at the same time.
A previous attempt to correct the window had been to adjust the door striker so that the door was pulled downwards when shutting. This only made things worse and caused an annoying clunk when closing the door.
A previous attempt to correct the window had been to adjust the door striker so that the door was pulled downwards when shutting. This only made things worse and caused an annoying clunk when closing the door.