Firstly, about the lock on the glove-box handle: How do you change the lock barrel without damaging either the glove-box lid, the lock or the handle? I can’t find any fasteners and don’t want to force anything apart.
Secondly the side airbag system: The Sport’s basic seats have no wires going to them, but the Allure’s nice leather ones have multi-plugs underneath leading to the airbags and possibly seatbelt pre-tensioners. I want to get these to work (as I like things to operate as designed), but would this mean a transplant of the Allure’s SRS wiring loom with all the extra bits (and then programming), or are the necessary plugs simply taped-up under the Sport’s carpet?
And lastly: I’ve noticed that the Allure’s grey trimmed door cards have door locking buttons poking out of the top of them, whereas the newer Sport’s door cards are blank. I don’t want to leave gaping holes in the nice new door cards, or have to have ugly blanking plugs showing. Would it mean a change of lock mechanism at the same time as the door cards, or can I just add the plungers with the buttons on?
Ta!
