Tyre pressure

Bodykits, alloy bits'n'pieces etc etc
col
Posts: 947
Joined: Fri Dec 07, 2001 1:00 am
Location: Newcastle

Post by col »

Hello

Can someone tell me the correct tyre pressure for 205/40-17 tyres

thanks

col
Colin
[url=http://www.peugeot206cc.co.uk/newowners?id=126]Owner 126[/url]
For sale- 17" Miglia Alloys. pm me if your interested

Dave-T
Posts: 1209
Joined: Tue Apr 16, 2002 1:00 am
Location: Sydney, Australia

Post by Dave-T »

normal pressure should be 32PSI

for 17 rim, you should be around 34-35PSI
[url=http://www.peugeot206cc.co.uk/newowners?id=287]Owner 287[/url]

col
Posts: 947
Joined: Fri Dec 07, 2001 1:00 am
Location: Newcastle

Post by col »

Thanks trungdinh

I remember you saying you were after a set of 17's. I've got mine and hopefully will post a piccy of them when i get round to it

col
Colin
[url=http://www.peugeot206cc.co.uk/newowners?id=126]Owner 126[/url]
For sale- 17" Miglia Alloys. pm me if your interested

Dave-T
Posts: 1209
Joined: Tue Apr 16, 2002 1:00 am
Location: Sydney, Australia

Post by Dave-T »

pictures would be great,

I don't have a 206CC yet, due to pick up my car on the 17th JUNE.........

"Wilsonson" was after 17s, I was just helping him with locations. Hehe
[url=http://www.peugeot206cc.co.uk/newowners?id=287]Owner 287[/url]

wilsonson
Posts: 77
Joined: Tue May 07, 2002 1:00 am
Location: Sydney Australia

Post by wilsonson »

yes, I'm looking for the 17s, still deciding which one. So, which brand did u end-up getting?

M275
Posts: 492
Joined: Thu Feb 21, 2002 1:00 am
Location: Portsmouth UK

Post by M275 »

OZ volcanoes - loook here
http://www.m275.com/car

M
http://www.m275.com/car

MMMM Dont you just love it!!!

Frosty
Posts: 877
Joined: Fri Dec 07, 2001 1:00 am
Location: Melbourne Australia

Post by Frosty »

I run about 40 PSI. I'm sure this sounds high to some of you but having just completed a advanced defensive driving course that was their recommendation. Ride will be a little rougher but handling is much better as too is tyre wear. The Manufacturers recommendation is always a compromise between ride and handling. I'll go for handling any day with the wallies out there on the roads.

Cheers

Frosty
Cheers

Frosty

Frosty
Posts: 877
Joined: Fri Dec 07, 2001 1:00 am
Location: Melbourne Australia

Post by Frosty »

I run about 40 PSI. I'm sure this sounds high to some of you but having just completed a advanced defensive driving course that was their recommendation. Ride will be a little rougher but handling is much better as too is tyre wear. The Manufacturers recommendation is always a compromise between ride and handling. I'll go for handling any day with the wallies out there on the roads.

Cheers

Frosty
Cheers

Frosty

Matt
Posts: 1053
Joined: Sun Mar 17, 2002 1:00 am
Location: Moved to Sydney, Australia

Post by Matt »

Frosty,

Who ran the defensive driving course you did? And was the recommendation of 40 PSI specific for the tyres on your CC?

The reason I ask is when I did a similar course (in a Ford Telstar TX5), they said small, medium, and large cars should have about 32, 34 and 36 PSI respectively. This seems a bit of a difference from two fairly reliable sources. Perhaps related to the CC's low profile tyres?
MMMMMmmmmm Diablo!!!!!! :D :D

Dave-T
Posts: 1209
Joined: Tue Apr 16, 2002 1:00 am
Location: Sydney, Australia

Post by Dave-T »

Frosty,
I have driven and currently "a test driver" for my boss :grin: , Merc E430 and HSV ClubSport both with 18s, the tyres pressure of both car are always 36PSI, I have try 38s & 40s, its a very rough / bouncy ride.
I still think if you are running 17s, pressure should be 34-35PSI.

MATT: I'm a currently onwer of a FORD Telstra TX5 (for only 3 more weeks), very cool car to drive.
[url=http://www.peugeot206cc.co.uk/newowners?id=287]Owner 287[/url]

Frosty
Posts: 877
Joined: Fri Dec 07, 2001 1:00 am
Location: Melbourne Australia

Post by Frosty »

Matt it was Murcott's. As for the ride I find it fine. There's definitely no damage to be done having higher pressures. I'm happy!

Cheers

Frosty
Cheers

Frosty