help....please!!!

hottest_cc · Post by **hottest_cc** » Thu Jul 07, 2005 5:43 pm

Bought some roll bars for my cc, (obviosly, doh! lol)

how'd u fit them?!?

in easy terms please, i'm a girl & they didnt have any instructions

I don't even know how to take the back seats off!!!

Thanks!

Post by **Lyndon** » Thu Jul 07, 2005 5:46 pm

please do a search as it's been covered a few times

if no luck let us know and we'll sort ya out

Jussi · Post by **Jussi** » Sat Jul 09, 2005 10:08 pm

Here are some kind of instructions: http://www.ccfreunde.de/apportal/main.p ... 6&artid=32

At least there are some pictures

Chas · Post by **Chas** » Sun Jul 10, 2005 12:51 am

Bought some roll bars for my cc, (obviosly, doh! lol)

how'd u fit them?!?

in easy terms please, i'm a girl & they didnt have any instructions

I don't even know how to take the back seats off!!!

Thanks!

You don't need to take the back seats out, if you are lucky your back cushion pads might just lift up and drop forwards so you can undo the 10mm nuts and swap the hoops over.

If not loosen and take off the two nuts at the front edge of the back seat.
This will let you lift the base seat up so you can reach to the back and just loosen the 10mm nuts a little, this will then let you lift the back pads of and remove the hoops and swap for the new ones.

Should only take about half hour at the most. (Just done mine)

Hope this helps

Chas

ladymxenna · Post by **ladymxenna** » Sun Jul 10, 2005 7:52 am

Being one for an easy life, i just ordered mine from the mazda dealer and am getting them to do it. I was tempted by the many many inexpensive rollerbars on Ebay, but didn't want to take the chance of buying a pig in a poke. So i've paid what i suspect is 'over the odds' for mine. Having said that, what price peace of mind!

I'd be interested to know how you get on with your though hottest_cc

Post by **Lyndon** » Sun Jul 10, 2005 8:45 am

Being one for an easy life, i just ordered mine from the mazda dealer and am getting them to do it. I was tempted by the many many inexpensive rollerbars on Ebay, but didn't want to take the chance of buying a pig in a poke. So i've paid what i suspect is 'over the odds' for mine. Having said that, what price peace of mind!

I'd be interested to know how you get on with your though hottest_cc

mazda dealer

don't think would fit

traceys · Post by **traceys** » Sun Jul 10, 2005 9:08 am

They will on ladymxenna mazda!