Tyre pressures

RobTuck · Post by **RobTuck** » Mon May 02, 2005 2:43 pm

This may seem like an odd question, but does anyone know what the tyre pressures should be for my 206cc 1.6 Quiksilver? It has the standard 16" Alloys.

My car is Italian sourced, so my handbook is in Italian, which I cant read, hehe. On that note, anyone know where I can get an English handbook?

Any help would be appreciated.

Nobby · Post by **Nobby** » Mon May 02, 2005 4:20 pm

Open the drivers door and look at the sticker on the door pillar it tells you what it should be.

Derek · Post by **Derek** » Mon May 02, 2005 4:31 pm

from memory i think it was 32psi

Dan · Post by **Dan** » Mon May 02, 2005 5:18 pm

yeah or 2.5 bar

RobTuck · Post by **RobTuck** » Mon May 02, 2005 9:04 pm

Excellent, cheers guys. It was right where you said.

DPH · Post by **DPH** » Tue May 03, 2005 11:54 pm

Isn't 2.5 bar 34lbs?

Jussi · Post by **Jussi** » Wed May 04, 2005 5:43 am

2.5bar is 36.259psi

Dan · Post by **Dan** » Wed May 04, 2005 9:43 am

it says 2.5 bar on the chart in the CC so its 2.5 bar

Nobby · Post by **Nobby** » Wed May 04, 2005 10:13 pm

1 bar = 14.5037738 pounds per square inch

Derek · Post by **Derek** » Wed May 04, 2005 11:38 pm

No need to get all technical

Nobby · Post by **Nobby** » Fri May 06, 2005 3:32 pm