Hi guys
need some advice as some twats snapped the main front wiper (drivers side) the one with the linkage arm and cover on.
I've just picked up a replacement part for 58 quid and removed the 2 bolts on the snapped linage arm on the car but the bugger wont bude
the arm is sitting on the screwed rod, does anyone have any experience on this or know why I cant remove the linage arm?
I’ve spayed wd40 onto the screwed rods.
Help!!! -- How to replace wiper linkage arm!
-
WebCode
- Posts: 202
- Joined: Fri Jun 13, 2003 6:40 pm
Yep , you need a puller to get the arm off the linkage/arm..
It will be firmly stuck due to corrosion caused by electrolytic action of the alloy in the arm and the steel linkage.. and the fact that the linkage pin is splined to add extra security..
It will be firmly stuck due to corrosion caused by electrolytic action of the alloy in the arm and the steel linkage.. and the fact that the linkage pin is splined to add extra security..
For as long as but one hundred of us remain alive, we will never on any
condition submit to the domination of the English.
It is not for glory, nor riches, nor honours that we fight, but for freedom
alone, which no good man gives up except with his life. Arbroath 1320
condition submit to the domination of the English.
It is not for glory, nor riches, nor honours that we fight, but for freedom
alone, which no good man gives up except with his life. Arbroath 1320