Question help me pls!!
-
FILTHYGORGEOUS
- Posts: 1
- Joined: Wed Jan 19, 2005 11:34 pm
-
el_maniako
- Posts: 23
- Joined: Sun Jan 16, 2005 3:05 am
that i can help you with!
so its like this
1st - you have to unscrew the entire doorpanel..and remember to take that plastic behind the mirror
2nd- be carefull when you pull the doorpanel out cause there are some plastic 'screws' holding the doorpanel in place...they are placed in the bottom and on the sides and also arround the armrest...you'll have to force it a little but be carefull not to brake them...try to pull the panel by those plastic screws to avoid damaging them
3rd- you'll see the speaker right away....but some speakers may be deeper than the original so you'll have to cut some plastic...but nothing scary...believe me
4th- then just wire the new speakers and they are ready to rock n' roll
you may have to apply some terminals but just remember...black/brown wire - negative pole...red wire - positive pole (the colours may be different but you'll figger it out at the time
)
5th-just put everything back in place and 'voilá'
i'll try to put some pictures here
so its like this
1st - you have to unscrew the entire doorpanel..and remember to take that plastic behind the mirror
2nd- be carefull when you pull the doorpanel out cause there are some plastic 'screws' holding the doorpanel in place...they are placed in the bottom and on the sides and also arround the armrest...you'll have to force it a little but be carefull not to brake them...try to pull the panel by those plastic screws to avoid damaging them
3rd- you'll see the speaker right away....but some speakers may be deeper than the original so you'll have to cut some plastic...but nothing scary...believe me
4th- then just wire the new speakers and they are ready to rock n' roll
you may have to apply some terminals but just remember...black/brown wire - negative pole...red wire - positive pole (the colours may be different but you'll figger it out at the time
5th-just put everything back in place and 'voilá'
i'll try to put some pictures here
-
el_maniako
- Posts: 23
- Joined: Sun Jan 16, 2005 3:05 am
here are some pictures:
1 - the door without the doorpanel

2 - here is the new wiring to the amps (you dont need to do this...but i installed 2 amps in the back so i needed extra wiring)

3 - here is the doorpanel out of the door

4 - here is the scariest part
if the speaker doesnt fit you have to cut some plastic...but not to worry...you probably wont need to do this

5 - here is the new speaker in place...by the way its 16,5 cms (diameter)

6 - and finnally the wiring to the tweeter

i hope i could be usefull
Thanks to ImageShack for Free Image Hosting
1 - the door without the doorpanel

2 - here is the new wiring to the amps (you dont need to do this...but i installed 2 amps in the back so i needed extra wiring)

3 - here is the doorpanel out of the door

4 - here is the scariest part

5 - here is the new speaker in place...by the way its 16,5 cms (diameter)

6 - and finnally the wiring to the tweeter

i hope i could be usefull
Thanks to ImageShack for Free Image Hosting
-
niderium
- Posts: 3
- Joined: Wed Jan 19, 2005 9:38 pm
Thnx a lot guys!u were helful also i have another one question!can i change the back speakers?and what size do i have to use?i bought 170watt for the front doors are there good?i bought sony XSF1723 16,5cm speakers so i wont have any problem!but let me know if u know if i can change also the speakers behind me!thanx a lot guys!
-
el_maniako
- Posts: 23
- Joined: Sun Jan 16, 2005 3:05 am
well yes you can but its a lot worse than doing the doors!
believe me!
but lets get started
1st - you have to take the back seats off (if you can call them that!
)
you will need some wrenchs and screw drivers so have your tool box at hand
the sit itself has to be push down cause its stuck below the back of the seat
then you have to take the back of the seat off
you have to unscrew a nut below the seat and then pull it up and off
you have to put your car looking like this: (scary)

2nd- you will need to take the rubber where the door fits off (i cant explain it better but look at the next photo) you have to get to this point:

3rd- just take the speaker off...wire it...and put it all back to normal (if you can)
good luck man
if you need some more help just say it
Thanks to ImageShack for Free Image Hosting
but lets get started
1st - you have to take the back seats off (if you can call them that!
you will need some wrenchs and screw drivers so have your tool box at hand
the sit itself has to be push down cause its stuck below the back of the seat
then you have to take the back of the seat off
you have to unscrew a nut below the seat and then pull it up and off
you have to put your car looking like this: (scary)

2nd- you will need to take the rubber where the door fits off (i cant explain it better but look at the next photo) you have to get to this point:

3rd- just take the speaker off...wire it...and put it all back to normal (if you can)
good luck man
if you need some more help just say it
Thanks to ImageShack for Free Image Hosting