Superchargers

Exhausts, Air filters and the like.......
wrusst
Posts: 7
Joined: Wed Nov 27, 2002 6:23 pm

Post by wrusst »

Has anyone ever seen the supercharger kit for the cc . The Parotech boys have 1 and its pushing 220 bhp :shock: and do they no were to get one and what type of blower is it e.g (roots twin screw ect).

Chadd
Posts: 406
Joined: Tue Oct 15, 2002 12:43 am
Location: Folkestone,Kent

Post by Chadd »

Superchargers are not worth getting on the gti engine mate, I have looked into it myself and the engine will fall apart after a few thousand miles due to the engine not being strong enough for a bolt on mod.

Parotech have only done it as its a show car and will not be driven much.
Darran
member 365 and 176 according to owner list....SPOOKY!!

My new new website!! check it out and dont forget to sign my guestbook with your comments.
[url=http://www.freewebs.com/daz206cc/]Project 206cc[/url]

wrusst
Posts: 7
Joined: Wed Nov 27, 2002 6:23 pm

Post by wrusst »

i was going to look into forged lower compression piston manifolds + gaskets ect i have roughley 5k to spend anyway. thats a bit off topic the question is what type of charger is it and were do you get 1 pls :D

djviper
Posts: 42
Joined: Fri Jun 11, 2004 6:23 am

Post by djviper »

speak to eccosse or pug perfomance you will need to pay about 5 grand as the have to strenthen every thing but expect around 220 to 240 bhp

C3DPO
Posts: 6
Joined: Thu Oct 14, 2004 11:37 am
Location: Bromley, Kent

Post by C3DPO »

275bhp with turbo charger :)

Chadd
Posts: 406
Joined: Tue Oct 15, 2002 12:43 am
Location: Folkestone,Kent

Post by Chadd »

275bhp with turbo charger :)
Add another 100BHP and your be nearer to my turbo conversion mate!! :lol:
Darran
member 365 and 176 according to owner list....SPOOKY!!

My new new website!! check it out and dont forget to sign my guestbook with your comments.
[url=http://www.freewebs.com/daz206cc/]Project 206cc[/url]

C3DPO
Posts: 6
Joined: Thu Oct 14, 2004 11:37 am
Location: Bromley, Kent

Post by C3DPO »

chad what have you had done to reach that sick BHP!!!! :)

Love the parotech kit mate, cant wait to see it when complete.

What sort of price are you paying to have the parotech kit fitted and sprayed, as Im looking at places in or around kent that could hook me up

Thanks

C3

Chadd
Posts: 406
Joined: Tue Oct 15, 2002 12:43 am
Location: Folkestone,Kent

Post by Chadd »

everything that could be done mate, most of the internal parts are from america as thats the only place who can make them.

I cant give you a price for the kit and sprayed mate as my bill was everything so im not too sure. I can hook you up with the lads doing my car if you want, they are mental and very good....well worth it.!!
Darran
member 365 and 176 according to owner list....SPOOKY!!

My new new website!! check it out and dont forget to sign my guestbook with your comments.
[url=http://www.freewebs.com/daz206cc/]Project 206cc[/url]

Derek
Posts: 5541
Joined: Thu Dec 06, 2001 1:00 am
Location: West Lothian, Scotland

Post by Derek »

any sign of the car being finished chadd ? if not do you have any updated pics ?
Derek

206CC 2.0SE Owner 2001 to 2004 - 308CC GT Owner 2010 to 2011 - Now RCZ GT 200BHP Owner

[img]http://www.ecosse-peugeot.co.uk/images/ecosse_logo.gif[/img] Peugeot Specialists: http://www.ecosse-peugeot.co.uk

Chadd
Posts: 406
Joined: Tue Oct 15, 2002 12:43 am
Location: Folkestone,Kent

Post by Chadd »

any sign of the car being finished chadd ? if not do you have any updated pics ?
oh yer definately but not rushing it now as show season is gone.

i think you lot have seen the photos I have, I've not been up there for a month as working non stop.
Darran
member 365 and 176 according to owner list....SPOOKY!!

My new new website!! check it out and dont forget to sign my guestbook with your comments.
[url=http://www.freewebs.com/daz206cc/]Project 206cc[/url]