Lexus Lights Installed :o)
-
Simon (PugSport)
- Posts: 138
- Joined: Thu Dec 06, 2001 1:00 am
- Location: Swindon
-
Erm
- Posts: 4430
- Joined: Thu Dec 06, 2001 1:00 am
- Location: North London
They look good, as i thought they would.........
BUT you say they need a modification before they are ready to fit the CC??? What does this include? Its not going to mean they dont fit properly and have problems with them cause 200 quid is alot of money.
Cheers
Erm
BUT you say they need a modification before they are ready to fit the CC??? What does this include? Its not going to mean they dont fit properly and have problems with them cause 200 quid is alot of money.
Cheers
Erm
MMMMmmmmmm V-TEC u gotta love it :)
- Lyndon
- Site Admin
- Posts: 5416
- Joined: Mon Nov 12, 2001 1:00 am
- Location: Notts,England
-
col
- Posts: 947
- Joined: Fri Dec 07, 2001 1:00 am
- Location: Newcastle
-
Simon (PugSport)
- Posts: 138
- Joined: Thu Dec 06, 2001 1:00 am
- Location: Swindon
The lights listed by Peugeot, Myself & Others are only "designed" for the 206 Saloon not the CC..
So they have to modified to fit.. But it is a 10-15 min job to do...
The bit that is cut off is only part of the "water" guard...
As it happens, my local dealer is refering any "Lexus" CC customers to me..
as I supply already modified lights.. Nice... thanks Peugeot 
Note: Peugeot & myself are supplying European "E" marked units... If you are buying from anyone else check that they are "E" approved and not just "TUV" approved..
Cos if they are TUV ones then you are legally obliged to fit the reflectors.. Yuk!
The "E" marked units have reflectors built in to the brake light..
_________________
Simon
MoonStone 206CC SE
simon@pugsport-gti.com
PugSport-GTi Performance Tuning & Performance 206 Group
<font size=-1>[ This Message was edited by: Simon (PugSport) on 2002-02-28 17:44 ]</font>
So they have to modified to fit.. But it is a 10-15 min job to do...
As it happens, my local dealer is refering any "Lexus" CC customers to me..
Note: Peugeot & myself are supplying European "E" marked units... If you are buying from anyone else check that they are "E" approved and not just "TUV" approved..
Cos if they are TUV ones then you are legally obliged to fit the reflectors.. Yuk!
The "E" marked units have reflectors built in to the brake light..
_________________
Simon
MoonStone 206CC SE
simon@pugsport-gti.com
PugSport-GTi Performance Tuning & Performance 206 Group
<font size=-1>[ This Message was edited by: Simon (PugSport) on 2002-02-28 17:44 ]</font>
Simon
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
-
Simon (PugSport)
- Posts: 138
- Joined: Thu Dec 06, 2001 1:00 am
- Location: Swindon
I you buy from me, then the lights will already be modified to fit...
All you need to do is look inside the boot... & behind each light the carpet has had a "door" cut into it.. Pull this piece or carpet open and you will see a black "wing" nut...
Remove this nut, disconnect the single wiring plug of the back of the OE lights and remove from the car..
fitting is the reverse of removal..
It really is a 2 min job

All you need to do is look inside the boot... & behind each light the carpet has had a "door" cut into it.. Pull this piece or carpet open and you will see a black "wing" nut...
Remove this nut, disconnect the single wiring plug of the back of the OE lights and remove from the car..
fitting is the reverse of removal..
It really is a 2 min job
Simon
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
-
Simon (PugSport)
- Posts: 138
- Joined: Thu Dec 06, 2001 1:00 am
- Location: Swindon
No the warranty will not be affected..
Cos the Lights are exactly the same as those supplied by Peugeot, but cheaper than them, so better value for money

Cos the Lights are exactly the same as those supplied by Peugeot, but cheaper than them, so better value for money
Simon
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
-
M275
- Posts: 492
- Joined: Thu Feb 21, 2002 1:00 am
- Location: Portsmouth UK
- Lyndon
- Site Admin
- Posts: 5416
- Joined: Mon Nov 12, 2001 1:00 am
- Location: Notts,England
-
Simon (PugSport)
- Posts: 138
- Joined: Thu Dec 06, 2001 1:00 am
- Location: Swindon
Lyndon,
Just unplug the old ones and then plug in the new.. NO need to disconnect the battery..
Just unplug the old ones and then plug in the new.. NO need to disconnect the battery..
Simon
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
MoonStone 206CC SE
[email]simon@pugsport-gti.com[/email]
[url=http://www.pugsport-gti.com][b]PugSport-GTi Performance Tuning[/b][/url] & [url=http://www.pugsport-gti.co.uk][b]Performance 206 Group[/b][/url]
-
Erm
- Posts: 4430
- Joined: Thu Dec 06, 2001 1:00 am
- Location: North London
Hi everyone, got my lexus lights today from rob, installed them tonight.
Piece of cake to fit them, and they look sooooooooooooooooooooooo good, set the back end of the car off.
You dont need to disconnect the battery, its all so easy, hardest bit was removing the extra bit of plastic, but even that was easy.
Pics to come very shortly
Erm
Piece of cake to fit them, and they look sooooooooooooooooooooooo good, set the back end of the car off.
You dont need to disconnect the battery, its all so easy, hardest bit was removing the extra bit of plastic, but even that was easy.
Pics to come very shortly
Erm
MMMMmmmmmm V-TEC u gotta love it :)
