Pug 206cc 2.0 s16 (2001) Coil Pack

[Nick1981-1]

Hi Guys

I need to change the ignition coil pack over on my Pug. I have found the correct part on euro car parts for 47 quid. I will change the spark plugs over at the same time. How do I do this. I know its just bolted on at either end and plugged in. Where is the coil pack located. I have had a quick look under the bonnet and cant see it. Do I need to remove the plastic silver engine cover to get at it. Thanks in advance guys

Nick

[Skezza]

Be wary of the cheaper ones....

[gazza82]

Yes, under the silver cover. Several twist clips and lift off.

Cheaper units and NGK plugs don't mix.

I found Bosch Super 4s were really good in our old 2.0 CC.

[Nick1981-1]

Thanks folks. I found it with your help. Much appreciated.

Nick

[Piyas]

Yes, under the silver cover. Several twist clips and lift off.

Cheaper units and NGK plugs don't mix.

I found Bosch Super 4s were really good in our old 2.0 CC.

How about for a 1.6 16, what's the best plugs to use?

[Capncol]

Super 4's