Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal

Nick1981-1 · Post by **Nick1981-1** » Tue Nov 15, 2016 12:10 am

Hi Guys, I hope this message finds everyone well. I have a query. The little fan that sits behind the passenger side airbag to the right hand side, where the little vent is that is used to suck air onto a sensor for cabin temp etc has dropped off the clip that holds it in place. I have tried getting my hand up to re attach it and I cant. I am wanting to remove the air bag panel, not unplug it, just so I can re attach the fan on the back. Can anyone give me instructions on how to do this. I am quite technically savvy so just some pointers in the right direction on how to remove it would be great.

Many Thanks In Advance

Nick

Post by **IanL** » Tue Nov 15, 2016 12:34 am

If you pull down the glovebox (squeeze the sides in to release the stops), will that give you the access you need?

Post by **Capncol** » Tue Nov 15, 2016 9:37 am

Disconnect battery before working on or near airbags. Use the correct disconnection method (you can find it on this site)

Nick1981-1 · Post by **Nick1981-1** » Tue Nov 15, 2016 6:06 pm

Thankyou for your replies. I appreciate your help.

Thanks

Nick

Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal

Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal

Re: Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal

Re: Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal

Re: Pug 206cc 2001 (98-02 variant) Passenger Air Bag Removal