Correct wheel stud Question?

[Spitfire6]

Hi,
I have OEM alloys on my car.
Today I spent 600 quid for MOT and now I have vibration; This will be for another thread.

I removed 6 wheel studs and only two were the same. One is tapered. One is tapered with a washer. One is not tapered. One is tapered with two washers. One has a tapered washer. One has a different AF Hex.

And there are about three different lengths!!! LOL.

So, my problem is what are the correct type and length for my wheels so I can buy some and then get my other problems sorted.

Any help with links will be gratefully accepted.

Thanks,
Iain.

[gazza82]

Nimrods have the bolts with flat captive washers ... These look ok

http://m.ebay.co.uk/itm/4-M12-x-1-25-35 ... nav=SEARCH

they were 17mm heads for the smaller 14" nimrods on our hatchback

The dealer wasn't expensive when I bought 12 new ones a few years ago

[Spitfire6]

Hi,
Many thanks.
I had used the search but any EBay link was too old to show.

You have shown me the beast I need.
Cheers,
Iain.

P.S It also means the chamfer only ones are way wrong!

[gazza82]

Chamfer only are for steel wheels.

Incidentally fit steels and the washers sit proud of the wherl and the chamfered face fits the wheel ... Dual-purpose bolts.