heater matrix bolts ??

Anything related to the 206CC
aland13uk
Posts: 16
Joined: Mon Mar 16, 2015 5:28 pm
Location: redcar

heater matrix bolts ??

Post by aland13uk »

hi I wondered if someone could tell me the size of the bolt I would need ( please see attached pictures )
I have a slight leak in one of the pipes and after looking I noticed a bolt was missing

thanks alan
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Capncol
Posts: 3761
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: heater matrix bolts ??

Post by Capncol »

I would guess at M6, but the best thing would be to take one of the others out and get it matched up at a fastener supplier
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
Top
User avatar
GrandadMonkey
Posts: 3583
Joined: Thu May 04, 2006 8:00 am
Location: Leicestershire

Re: heater matrix bolts ??

Post by GrandadMonkey »

It was O-rings that had failed on my daughter's 307cc. If you have it apart I'd replace any O-rings.
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
Top
aland13uk
Posts: 16
Joined: Mon Mar 16, 2015 5:28 pm
Location: redcar

Re: heater matrix bolts ??

Post by aland13uk »

think I found my problem it only had one bolt in instead of all three in so I will have to see it that works if it doesn't then it will look like new o rings to fit
Top
User avatar
gazza82
Posts: 2129
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK

Re: heater matrix bolts ??

Post by gazza82 »

Looks like the square captive nut is missing as well so any nuts and bolts with square nuts should work .. or call your local Pug dealer ... sometimes parts aren't as expensive as you think from them
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo
Top
aland13uk
Posts: 16
Joined: Mon Mar 16, 2015 5:28 pm
Location: redcar

Re: heater matrix bolts ??

Post by aland13uk »

hi gazza yeah there was two nuts and bolts missing ( so it was only attached with one bolt ) I have just used some normal bolts that I had in the shed so its all nice and tight now so hopefully that will fix the leak. It was quite awkward to get to the bolt at the top but I got it in and tight eventually
Top

Return to “206CC General”