Problem with Aircon and Clock lighting

Electrical 206CC problems
peugeoholic
Posts: 2
Joined: Mon Jan 26, 2015 5:15 am

Problem with Aircon and Clock lighting

Post by peugeoholic »

I have a problem with my aircon and clock lighting on my 2006 206cc. Both AC and clock are functioning properly but there is no lighting, from memory I think both went off the same time. I replaced the bulbs on the clock to see if that will solve the problem but nothing happened. What should I check next?

gpktm
Posts: 45
Joined: Fri Nov 21, 2014 1:03 am
Location: Melbourne, AU

Re: Problem with Aircon and Clock lighting

Post by gpktm »

I have exactly the same problem. I fixed the Climate control lighting, it was just bad connection, I took off and put back all the plugs and it worked properly, but the clock lighting still does not.

User avatar
gazza82
Posts: 2129
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK

Re: Problem with Aircon and Clock lighting

Post by gazza82 »

Take the clock unit out (I take it you mean the multi function display on the top of the dash?)

Carefully take it apart and you will find TWO circuit boards. These attach to each other via a number of pins that are attached to one board and small clips on the other. They come away as the solder gets old. Resolder the pins and the clips, but it back and try again.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo

peugeoholic
Posts: 2
Joined: Mon Jan 26, 2015 5:15 am

Re: Problem with Aircon and Clock lighting

Post by peugeoholic »

I've checked it seems nothing wrong with the solder. Can the solder be worn out even if there are no visible marks?
You do not have the required permissions to view the files attached to this post.