imob reset with no keyfob just key?

CHAMPERS · Post by **CHAMPERS** » Thu Jan 22, 2015 10:51 am

I tried a memo-scan yesterday no fault codes but it wont access immob. I'm gonna take a wild hit and look the coil pack in case its that. The car has stood for a month or so. Does anyone know the procedure for checking the wires at the plug end? I have a test meter here just need to know which color wires.

Cheers

CHAMPERS · Post by **CHAMPERS** » Thu Jan 22, 2015 5:18 pm

Hi Guys thanks for the info!

Plugged a memoscan on it no fault codes at all.

Held key by ign ring opened door and when i move the key away it beeps so it knows the key is there.

Checked coilpack wire plug and the 4th one has a live feed. Change coilpack?

Are there any relays under bonnet that could be stopping it spark/start?

I see ppl talking about a brown ecu relay? Mine has the old style fuse box under bonnet. Ecu driverside near flitch panel.

Thanks again

CHAMPERS · Post by **CHAMPERS** » Fri Jan 23, 2015 11:08 am

Oh well never mind time is of the essence here.

CHAMPERS · Post by **CHAMPERS** » Fri Jan 23, 2015 1:50 pm

changed coilpack still no spark, I can here fuel pump kick in when ign on for few seconds. I hate these cars right now Ill end up burning it for fun soon lol

gazza82 · Post by **gazza82** » Fri Jan 23, 2015 2:59 pm

CHAMPERS wrote: Plugged a memoscan on it no fault codes at all.

I did say I thought PP2000 would be the only option ... especially early CC's. Early 2002 cars moved to EOBD (multiplex, a sort of CanBus system) but before then they were a hybrid designed by PSA ... even after that some of the "features" were hard to reach with EOBD compatible readers.

You can swap parts and throw money at it but you really need to get PP2000 on it.

Check out the peugeotforums and 206info sites as both have lists of owners prepared to hook up their systems on your car for a small gratuity and read the codes .. someone may be local.

http://www.peugeotforums.com/forums/mai ... -map-7734/

Post by **Capncol** » Fri Jan 23, 2015 7:23 pm

Do you have any warning lights on? PP2000 or a proper Pro scanner will access imobiliser menu. Does every thing else work OK?

CHAMPERS · Post by **CHAMPERS** » Fri Jan 23, 2015 9:40 pm

Hi, No warning lights at all.

Thanx Gazza to i have a local pug owner coming to plug his pp in on moday. He did ask if i had the 4 digit pin to access the bsi but i dont ? these are old cars now i dont think many ppl have that code? Yes everthing works no econ or immob warnings at all.

Cheers

Shane

CHAMPERS · Post by **CHAMPERS** » Fri Jan 23, 2015 9:44 pm

I looked at the fuses inside the car but the numbers are worn so i could do with a pic of Fuse box and which numbers the fuses are i just can see half of the raised numbers so a handbook list aint much use to me tbh.

CHAMPERS · Post by **CHAMPERS** » Thu Jan 29, 2015 11:03 am

Just to finish the thread off The guy who promised to come do the reading with pp never turned up or didnt call to say he wasn't coming! I called the AA the ran various scans which showed no engine speed on cranking over. He fitted a new cam sensor and voila she started! Ty for your help

imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?

Re: imob reset with no keyfob just key?