Are these the correct bolts for wheels?

[Jamesk07]

Hi all,

I've just bought the wheels below for my 206 cc:



Could you please tell me if the bolts below would fit them to my car correctly? I believe it's the flat bolts, not tapered that I require:



Also, I'm certain these wheels will fit, but have I made a rookie error and bought something that won't fit?

Many thanks,

James

[gazza82]

I'm not 100% but I think they are 306 wheels. So while the bolt holes may match up the offet may be wrong. On the back should be the ET value ie offset. Check what it is ... I assume you don't have alloys on the CC now to check their offset?

Bolts are 206 alloy bolts which should be ok with those wheels ... question is are wheels ok for your car?

lso if they are fixed centres you may fit it almost impossible to get them balanced properly.

[shep1001]

I believe this is the wheel bolt spec if you want to measure them or you could always take an old bolt out and compare it?

[Jamesk07]

Hi to you both,

Thank you for your help. Sadly you're right, the car came with horrible steels when I bought it, so I can't check.

I've seen lots of these alloys for sale on eBay and they're advertised as 206 GTI wheels, so maybe naively I've bought them on that info...

Hoping they fit now...

[Jamesk07]

http://pages.ebay.com/link/?nav=item.vi ... 1391739589

[Jamesk07]

Right... I think I've solved my own problem... Apparently there are two sets of Peugeot alloy that look very, very similar. I found a really useful Peugeot website, but cannot link it for some reason!

The 206 GTI ones are very similar to the 306 Cyclone. The biggest visual difference is around the bolt holes. Thankfully I appear to have bought the right ones... Phew.

Thank you guys again,

James

[Jamesk07]

http://www.peugeotperformance.net/tunin ... heels.html