need to know where timing marks are for my sons 206 pug, any links diagrams be great
thank you mark.
Timing
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: Timing
You do not have the required permissions to view the files attached to this post.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
i don't know whats going on but can`t seem to get this pictures up and is missing the crank shaft info. 
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: Timing
If you click the pic it will enlarge. Crank info is shown top left (denoted 6)
No timing marks. It's done by pinning crank and cam in locations shown.
No timing marks. It's done by pinning crank and cam in locations shown.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
ok thank you, now tomorrow is saturday can start again, 
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
can any one confirm if this looks like both timing marks,
im going to fit water pump and see if i can locate hole in block,
im going to fit water pump and see if i can locate hole in block,
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Re: Timing
No. The engine has no timing marks.
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
see next post.
Last edited by pugpeg on Sat Feb 15, 2014 4:59 pm, edited 1 time in total.
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
have located the hole by turning crank and pin went in and locked up crank shaft now is that the only hole no more on fly wheel?
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Re: Timing
That looks like it to me. After turning the crankshaft until the timing hole in the camshaft sprocket is aligned with the corresponding hole in the cylinder head. Insert a 6mm diameter bolt or pin in there (where you are pointing) and locate it in the flywheel/driveplate hole. With the flywheel correctly positioned insert a 10mm bolt or pin through the timing hole in the camshaft sprocket, and locate it in the cylinder head. The crankshaft and camshaft are now locked in position, preventing unnecessary rotation.
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
-
pugpeg
- Posts: 27
- Joined: Sat Feb 08, 2014 9:46 pm
Re: Timing
yeah it was the right hole and puggy is now up and running
Peugeot 206 LX 03 reg 1.4 cc 83000 miles.
-
GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Re: Timing
Well done pugpeg!
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)