206cc roof not working
-
norm1987
- Posts: 2
- Joined: Sun Dec 02, 2012 5:58 pm
206cc roof not working
right this is what is happening roof isn't working just beeping all the catches are down and rear shelf is in position also windows don't go down by the roof switch but when i put the windows down by the window switch they work find just this annoying beeping sound when going up and down also tested the continuity of the micro switches found 1 bad 1 so just bridged it but still no look any help would be really appreciated thanks
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206cc roof not working
No good just bridging- you need to change it. The ecu relies on the correct opening/ closing of the switches to know where the roof is in the cycle.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
norm1987
- Posts: 2
- Joined: Sun Dec 02, 2012 5:58 pm
Re: 206cc roof not working
but even if i bridged the micro switch (G) shouldn't it do something till it got to that point in cycle or wouldnt it
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206cc roof not working
That switch is telling the ecu the boot is open.
The only one you could bridge would be "H" (boot blind) The rest have to open & close within a certain time frame or else ecu assumes something in the cycle has stuck or not reached the correct point for the next part of the operation to continue, so if it sees one switch wrong it will error.
Watch the video. It's all explained there.
The only one you could bridge would be "H" (boot blind) The rest have to open & close within a certain time frame or else ecu assumes something in the cycle has stuck or not reached the correct point for the next part of the operation to continue, so if it sees one switch wrong it will error.
Watch the video. It's all explained there.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.