Please help roof fault

[markharriers]

Hi all im hoping someone can help me :/ my roof on my 206 was working fine until today. When i release the side clips and press the button nothing happens just can hear the micro switch. The only thing i have done is go in the boot? Would be very grateful of some advice as there was no pre warning it was working perfectly.

Thanks in advance

[IanL]

Check that the blind in the boot is correctly positioned, and the switches are functioning.

[markharriers]

Thanks for you reply the blind is clipped in but i operate the switch and nothing no warning beep nothing. I retracted the blind and i got a warning beep as i would expect??

[gazza82]

We had to replace the operating switch once .. they don't last forever

Pull it out of the centre console gently and check that it is still plugged in first.

[markharriers]

Thanks guys if i de atract the curtain in the boot and try main switch i get and error beep as i would expect so this tells me the switch is fine??

[IanL]

Yes. How about the switches at the tops of the windscreen pillars?

[markharriers]

Thanks for your help guys

I have attached and de attached the top left lever and all of a sudden i got a beep and now it works. So now im wondering do i take the pannel off by the lever hook and have a look whats behind there? A micro switch?

[IanL]

There's a microswitch each side. Sometimes they need cleaning. A spray can of electrical switch cleaning fluid is ideal, e.g. this.

[markharriers]

There's a microswitch each side. Sometimes they need cleaning. A spray can of electrical switch cleaning fluid is ideal, e.g. this.

Thankyou so i best remove the trim and have a look