I recently had flat battery due to leaving lights on. Jump started ok but now engine management light came on. It also went into limp mode, I stopped turned the engine back on, runs ok but engine management light remains on. Any suggestions?
Many thanks in advance
206 verve 2006
-
IanL
- Posts: 1557
- Joined: Wed May 13, 2015 10:34 pm
- Location: Jersey, Channel Islands
Re: 206 verve 2006
Read the fault code(s).
Actually, it may be false code(s) caused by the electrical shenanigins, so try resetting the code(s) after recording it/them. If it/they do not come back, that was what it was.
Actually, it may be false code(s) caused by the electrical shenanigins, so try resetting the code(s) after recording it/them. If it/they do not come back, that was what it was.
-
gazza82
- Posts: 2129
- Joined: Sat Apr 23, 2011 8:41 pm
- Location: Buckinghamshire, UK
Re: 206 verve 2006
It might go off on its own if you use the car a few times. In other cases it will need to be reset.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo