Custom mats for ccs

Anything related to the 206CC
Justin
Posts: 215
Joined: Thu Jan 03, 2002 1:00 am

Post by Justin »

I remember this topic coming up on the old forum (last summer I think), the consensus seemed to be that regular 206 mats wouldn't fit and Peugeot would be making some especially for the cc.
Has anyone managed to get hold of any decent mats that fit? - I'm currently using some cheap and nasty rubber things just to protect the carpet but they look awful.

TIA,
Justin

BTW. anyone else had trouble with the carpet coming away from underneath the rubber strip on the door sill - mine keeps doing it despite having been back to the dealer, I think the carpet may have been cut slightly too small.

Rich
Posts: 141
Joined: Sat Dec 08, 2001 1:00 am
Location: Redbridge

Post by Rich »

Justin,
I've got a set of bog standard Peugeot mats from the dealer which fit no problem.The grip on the drivers side mat holds it in place brilliantly (just make sure you take time to position correctly before piercing carpet with sharp knife/scissors, also don't make hole too big,shouldn't be visible. Let the screw you tighten down do all the work!) There fine while I'm waiting for the flashier CC mats to come out in the UK.Hope this helps.:smile:

Rgds

Rich

clasu
Posts: 20
Joined: Wed Dec 26, 2001 1:00 am
Location: denmark

Post by clasu »

I got 206cc rubber mats that fit absolutely perfect.
Retail around 50£ in Denmark.
Dark grey with little white text saying 206cc all over. Very nice

marty
Posts: 1
Joined: Mon Jan 14, 2002 1:00 am
Location: Buckinghamshire

Post by marty »

Justin,
I have a set of 'Diplomat' carpet mats for our cc from http://www.autostyle.co.uk, which are 'custom fit' for the standard 206. They fit fine, though in the back they do have to bend up a little under the rear seat due to the reduced floor space. There is a pretty good choice of colours and they seem good quality, although of course they are never going to be as durable as rubber!

Regards,
Marty.

p.s. Autostyle were mentioned on the old forum last summer

nx
Posts: 164
Joined: Thu Jan 03, 2002 1:00 am
Location: Manchester

Post by nx »

I got a cheapo set from Argos for £15. They are black and the drivers side has an aluminium/metal foot plate on it so it looks quite cool. The drivers side also has the hole in it so it fits over the standard plastic securing thingy.
[url=http://www.peugeot206cc.co.uk/newowners?id=180]Owner 180[/url]

mellers
Posts: 103
Joined: Thu Dec 20, 2001 1:00 am
Location: hampshire

Post by mellers »

we have the heavy duty rubber ones from the dealer they fit perfect and cost around £25

Derek
Posts: 5541
Joined: Thu Dec 06, 2001 1:00 am
Location: West Lothian, Scotland

Post by Derek »

as they were still like new, i just took the mats from my last 206 and they fit fine.

i wasn't leaving mats that cost £35 for the dealer to get :smile:

derek
Derek

206CC 2.0SE Owner 2001 to 2004 - 308CC GT Owner 2010 to 2011 - Now RCZ GT 200BHP Owner

[img]http://www.ecosse-peugeot.co.uk/images/ecosse_logo.gif[/img] Peugeot Specialists: http://www.ecosse-peugeot.co.uk

col
Posts: 947
Joined: Fri Dec 07, 2001 1:00 am
Location: Newcastle

Post by col »

I got a set of standard grey 206 mats from Peugeot which fit in perfectly, still can't believe they wouldn't give them for free!! they were only £25
Colin
[url=http://www.peugeot206cc.co.uk/newowners?id=126]Owner 126[/url]
For sale- 17" Miglia Alloys. pm me if your interested

rob
Posts: 2232
Joined: Sat Dec 01, 2001 1:00 am
Location: Belper, England

Post by rob »

Justin, you remembered half the story about mats.

Peugeot mats will fit fine. The problem was that the special CC mats are for Left hand drive cars only so are no good for the UK.

I am just awaiting a new 'european brochure' so IO can see whats what and we can perhaps bypass 'euro dealers who arent allowed to sell accessories to us.

Should get it next week all being well.
Rob

Smart Brabus Roadster - exactly what it says on the badge