Hi, Could anyone help me please I have a 2002 206 1.9d for the past 4 days having problems starting car. engine turns over but if revs over 1500 rpm engine cuts out with oil can light and stop light on. then car will not start for about half an hour. then same problem again. sometimes the orange engine light comes on as well. then left car a couple of hours started ok ran for the rest of the day. the following day same problem. took car to 2 Peugeot dealers and they could not find any fault codes registered. have checked all earth connections and all sensor connections. oil level ok any suggestions would be grateful. as live in france. and mechanics here don't tell you much.
Thankyou Andy
206 1.9d engine cuts out
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206 1.9d engine cuts out
Hi Andy and welcome.
The oil can light means low oil pressure. Does the engine sound noisy? (rattling) If so then you have a serious engine issue. It could, however, be the oil pressure sensor faulty.
When you say it cuts out and won't start for 1/2 hr, will it crank over, or does the engine not turn at all?
The oil can light means low oil pressure. Does the engine sound noisy? (rattling) If so then you have a serious engine issue. It could, however, be the oil pressure sensor faulty.
When you say it cuts out and won't start for 1/2 hr, will it crank over, or does the engine not turn at all?
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi Capncol thanks for the quick reply, the engine will turn over but not fire up however the coil light does not light up or the relay engage for post preheat. also no sound from injection pump (tapping sound). sometimes the airbag light comes on as well. weird
The engine sounds quiet when running. the only sensor disconnected is the egr valve sensor as egr valve clogged up.
I have ordered oil pressure sensor and oil temp sensor just in case.
many thanks
Andy
The engine sounds quiet when running. the only sensor disconnected is the egr valve sensor as egr valve clogged up.
I have ordered oil pressure sensor and oil temp sensor just in case.
many thanks
Andy
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206 1.9d engine cuts out
How old is the battery? You will get random electrical problems with a failing battery. Search this site for the many examples of this.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Capncol,
Not sure how old the battery is more than 2 years old as this is the length of time son has had the car. A little bit more history, changed all four preheat coils as car was difficult to start in morning with the bad spell of cold weather sometimes only starting on 2nd or 3rd turn of key. So will investigate battery. Have available battery from my 1999 ford escort estate diesel. only 9 months old. will read thread about failing battery.
Once again thankyou
Andy
Not sure how old the battery is more than 2 years old as this is the length of time son has had the car. A little bit more history, changed all four preheat coils as car was difficult to start in morning with the bad spell of cold weather sometimes only starting on 2nd or 3rd turn of key. So will investigate battery. Have available battery from my 1999 ford escort estate diesel. only 9 months old. will read thread about failing battery.
Once again thankyou
Andy
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi,
Tried battery from my ford escort did not change anything observed procedure for disconnect reconnect battery.
Tried battery from my ford escort did not change anything observed procedure for disconnect reconnect battery.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi,
Are there any relays I can check with this being multiplexed apart from relay for glow plugs as this is not being energised
Are there any relays I can check with this being multiplexed apart from relay for glow plugs as this is not being energised
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206 1.9d engine cuts out
I think the the glow plugs are a red herring. It won't stop the engine once running. If you are sure battery is OK wait till you have eliminated oil pressure sensor, after that try and get it on diagnosics and see if there are any codes stored.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi Capncol,
No probs will wait and until changed oil pressure sensor. as regards to diags whats your thoughts on lexia 3 pp2000 for the price as pergeot here charge 79 euros about 70 quid.
No probs will wait and until changed oil pressure sensor. as regards to diags whats your thoughts on lexia 3 pp2000 for the price as pergeot here charge 79 euros about 70 quid.
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206 1.9d engine cuts out
PP2000 will do it, but it's not very intuative to use.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi Capncol,
Changed Oil Pressure sensor, made no difference. Do you know what the 35amp green relay is for beneath engine bay fusebox, just for my info as not listed in Haynes manual or RTE (French equiv) in fact my French manual does not list a wiring diag for multiplexed model. So scratching my head, do I plunge in and buy Lexia 3 as works out cheaper than putting car in garage for diag's if lexia 3 will work this car.
many thanks for your help
Andy
Changed Oil Pressure sensor, made no difference. Do you know what the 35amp green relay is for beneath engine bay fusebox, just for my info as not listed in Haynes manual or RTE (French equiv) in fact my French manual does not list a wiring diag for multiplexed model. So scratching my head, do I plunge in and buy Lexia 3 as works out cheaper than putting car in garage for diag's if lexia 3 will work this car.
many thanks for your help
Andy
-
Enright
- Posts: 452
- Joined: Tue Apr 17, 2012 2:24 pm
- Location: Arnold, Nottingham
Re: 206 1.9d engine cuts out
I would - it should do.fozzybear wrote:So scratching my head, do I plunge in and buy Lexia 3 as works out cheaper than putting car in garage for diag's if lexia 3 will work this car.
Even if you only use it a couple of times then resell it, it should pay for itself.
BCingU,
Neil.
Mine: Daily driver; Mk2 MG ZS+ (TD). Current projects; 2 x Lotus Elan SE Turbos
Previous project: 56 plate 206 CC 1.6 Sport (with added Allure!)
Neil.
Mine: Daily driver; Mk2 MG ZS+ (TD). Current projects; 2 x Lotus Elan SE Turbos
Previous project: 56 plate 206 CC 1.6 Sport (with added Allure!)
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: 206 1.9d engine cuts out
I haven't got a wiring diagram for the diesels to hand, so not sure about that relay. Next stage is diagnostics really. Lexia is for Citroens and PP2000 is for Peugeots, and it needs a windows XP platform to run, either directly or through VM sofware. I will try and find wiring diagrams later but may take me til after the weekend.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Capncol,
Ok Cheers for that, going to order Diag tool off internet yep know about sys requirements.
Andy
Ok Cheers for that, going to order Diag tool off internet yep know about sys requirements.
Andy
-
fozzybear
- Posts: 14
- Joined: Fri Apr 19, 2013 7:14 pm
- Location: France
Re: 206 1.9d engine cuts out
Hi Just an update, Peugeot Planet is unable to communicate with ECU. Does anyone know which pinouts to check for voltage. etc...