"STOP"

Anything related to the 206CC
Frosty
Posts: 877
Joined: Fri Dec 07, 2001 1:00 am
Location: Melbourne Australia

Post by Frosty »

Was driving along yesterday and very breifly heard a beep and the "STOP" sign on the instrument panel illuminate. Didn't do it again. Anyone else seen this? Sounds like some of the other intermittent signals.
Cheers

Frosty
Top
CB
Posts: 4312
Joined: Mon Apr 08, 2002 1:00 am
Location: Classified

Post by CB »

Yep i had it - posted it up in the "Other" section of the forum...and my fuel guage dropped from 3/4 to zero as well. Scared me a bit....hasn't happened again though....
[img]http://bluntman.d2.net.au/newsmilies/brick.gif[/img]
Top
Frosty
Posts: 877
Joined: Fri Dec 07, 2001 1:00 am
Location: Melbourne Australia

Post by Frosty »

Multi-perplexing!
Cheers

Frosty
Top
Dave-T
Posts: 1209
Joined: Tue Apr 16, 2002 1:00 am
Location: Sydney, Australia

Post by Dave-T »

yes I saw it, then I realised that the door was not fully lock.
[url=http://www.peugeot206cc.co.uk/newowners?id=287]Owner 287[/url]
Top
Kirk
Posts: 64
Joined: Mon Dec 10, 2001 1:00 am
Location: Adelaide - Australia

Post by Kirk »

I reckon I had it once too when I first got the car and I was driving along trying to hit the window switch and accidently hit the roof switch. It didn't like that so I pulled over and made sure the roof was fully in position and all seemed good.

Well I think that was what happened.

Kirk.
Top
princesskeely05
Posts: 6
Joined: Mon Jun 14, 2010 12:39 pm

Post by princesskeely05 »

mynes done this too we had a look and it turns out a connection to the clamps on the battery wasn't fully connected properly and therefore the connections kept coming off! Always check the battery is fully and properly connected tightly :)
Top
52nd of February
Posts: 314
Joined: Sun Oct 18, 2009 11:06 am

Post by 52nd of February »

princesskeely05 wrote:mynes done this too we had a look and it turns out a connection to the clamps on the battery wasn't fully connected properly and therefore the connections kept coming off! Always check the battery is fully and properly connected tightly :)
Haha I'm forced to do this - I live down a gravel road and the bumps shake the positive terminal loose. So when I stop the car after the terminal hasa been loosened, ignition will turn on but when trying to start the car, 'click' and all lights go out. "sigh, terminal has come off again....." all settings reset its ANNOYING

However, it has never brought up the STOP warning light...

Same with accidentally hitting the roof button, Ive done that once or twice, all it does is bleep because I'm going faster than 10km/h, latches not unclipped and shelf not in place, shouldn't trigger the warning..... Hmmmmm......
Top

Return to “206CC General”