B3CB0IK1 - 206

IDENTIFICATION, DATA, TIGHTENING TORQUE(S) FRONT SUSPENSION

1 - IDENTIFICATION


(1) {{N12559}} fixation de tige d'amortisseur .

(2) Engine sub-frame front fastener .

(3) {{N12560}} fixation avant de bras inférieur .

(4) {{N12561}} fixation de transmission .

(5) {{N12562}} fixation rotule de biellette de connexion .

(6) {{N12563}} fixation arrière de bras inférieur .

(7) Anti-roll bar .

(8) Engine sub-frame rear fastener .

(9) {{N12564}} réglage de biellette de connexion .

(10) {{O32866}} fixation rotule inférieure de pivot .

(11) {{N12565}} fixation corps d'amortisseur sur pivot .

2 - DATA

2 - 1 - FRONT ANTI -ROLL BAR

engine code HFX - HFZ
KFW - WJZ - WJY
HFX - HFZ
WJZ - WJY
HFX - HFZ - KFW
WJZ - WJY - 7LZ
special features without 'Affaire' overseas export
anti-roll bar diameter (mm) 18 18 18

engine code NFZ - NFU - RHY NFZ - NFU - RHY
special features without overseas export
anti-roll bar diameter (mm) 19 19

engine code KFX RFR RFR - NFU
special features LPG without coupe-cabriolet
anti-roll bar diameter (mm) 18 20 20

Attention : phrase vide (a renseigner) .

2 - 2 - FRONT AXLE ANGLES

engine code HFX - HFZ HFX - HFZ - KFW HFX - HFZ
special features conventional steering
165/70 R13
power steering
165/70 R13
conventional steering
175/65 R14
H1 (mm) +12 / -8 122 122 123
track / wheel (mm) ± 0.5 -0.75 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 2° 16' 3° 16' 2° 16'
pivot angle ± 30' 9° 31' 9° 31' 9° 42'

engine code HFX - HFZ - 8HX
KFW - NFZ
WJZ - WJY - RHY
RHY - NFU
special features power steering
175/65 R14
power steering
185/65 R14
H1 (mm) +12 / -8 123 128
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 3° 16' 3° 16'
pivot angle ± 30' 9° 42' 9° 42'

engine code RFR RFR
special features power steering
185/55 R14
power steering
195/45 R16
H1 (mm) +12 / -8 120 129
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 3° 16' 3° 16'
pivot angle ± 30' 9° 42' 9° 42'

engine code KFX NFU - RFN
special features LPG
175/65 R14
coupe/cabriolet
185/55 R15
H1 (mm) +12 / -8 133 120
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 3° 24' 3° 13'
pivot angle ± 30' 9° 31' 9° 42'

'Affaire'
engine code HFX - HFZ HFX - HFZ
special features power steering
165/70 R13
conventional steering
165/70 R13
H1 (mm) +12 / -8 122 122
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 3° 44' 2° 44'
pivot angle ± 30' 9° 31' 9° 31'

'Affaire'
engine code WJZ - WJY WJZ - WJY
special features power steering
175/65 R14
conventional steering
175/65 R14
H1 (mm) +12 / -8 123 123
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30'
castor ± 30' 3° 33' 2° 33'
pivot angle ± 30' 9° 42' 9° 42'

overseas export
engine code HFX - HFZ - KFX
K6C - NFZ - NFU - WJZ
WJY - RHY - 7LZ
HFX - HFZ - KFX - K6C
WJZ - WJY - 7LZ
special features power steering
175/65 R14
conventional steering
175/65 R14
H1 (mm) +12 / -8 148 148
track / wheel (mm) ± 0.5 -0.75 -0.75
track / wheel (°) ± 5' -0° 7' -0° 7'
camber ± 30' 0° 7' 0° 7'
castor ± 30' 3° 05' 2° 07'
pivot angle ± 30' 9° 20' 9° 20'

NOTE : these values are for a reference height (H1) .

3 - {{N12566}} VALEURS DE PARALLELISME AVEC UN VEHICULE EN ORDRE DE MARCHE

3 - 1 - {{N12519}} VEHICULES EQUIPES DE PNEUMATIQUES 165/70 R13


(H) Height between the ground and the jacking point (In mm) .

(H1) Height from ground to front jacking bracket at reference height .

(P) Tracking at the axle (Tolerance ± 1 mm) .

3 - 2 - {{N12519}} VEHICULES EQUIPES DE PNEUMATIQUES 175/65 R14 - 185/55 R15 - 195/45 R16 ({{N12567}} SAUF VEHICULES GRAND EXPORT)


(H) Height between the ground and the jacking point (In mm) .

(H1) Height from ground to front jacking bracket at reference height .

(P) Tracking at the axle (Tolerance ± 1 mm) .

3 - 3 - {{N12568}} TOUS TYPES VEHICULES GRAND EXPORT


(H) Height between the ground and the jacking point (In mm) .

(H1) Height from ground to front jacking bracket at reference height .

(P) Tracking at the axle (Tolerance ± 1 mm) .

4 - TIGHTENING TORQUES


(2) Engine sub-frame front fastener : 11 da.Nm .

(3) {{N12560}} fixation avant de bras inférieur : 11 da.Nm .

(6) {{N12563}} fixation arrière de bras inférieur : 11 da.Nm .

(8) Engine sub-frame rear fastener : 11 da.Nm .

(10) Pivot ball joint : 4 da.Nm .

(11) Pivot clamp mounting : 5.5 da.Nm .

(12) Anti-roll bar link fixing : 3.5 da.Nm .

(13) Anti-roll bar link fixing : 3.5 da.Nm .

(14) Anti-roll bar bearing fixing : 10.5 da.Nm .

(15) Shock absorber mounting to body fastener : 2.5 da.Nm .