B2CG59K1 - 206 MA GEARBOX

ASSEMBLY GEARBOX

1 - SPECIAL TOOLS

2 - ASSEMBLY

Place the gearbox on a block of wood (H = 180 mm) .

Fit :

• the speedometer pinion (1)
• the reverse lamp switch (2)

1st fitting, Fit :

• the connecting plate (3)
• the clamp (4)
• the ball joint lever (5), with the ball joint greased

2nd fitting :

• refit the selection relay lever (6)

Lightly coat with MOLYKOTE BR2 PLUS (G10) grease :

• the splines (A) of the input shaft of gearboxes manufactured up to 02/01/95
• the clutch release bearing guide (B)

WARNING : an excess of grease on the splines of the input shaft may damage the clutch .

Refit the clutch stop (7) .

Fill the space between the oil seal lips with grease .

Fit :

• the final drive right hand output lip seal using the tool [1]
• the final drive left hand output lip seal ; using the tool [2]