B2CG50K1 - 206 MA GEARBOX

DISMANTLING GEARBOX

Remove the clutch stop (1) .

Place the gearbox on a block of wood (H = 180 mm) (Minimum) .

Remove :

• the mounting and the speedometer take-off gear (2)
• the reverse lamp switch (3)
• gearbox drain plug
• filling and level plug
• the final drive output seals

1st fitting, Remove :

• the ball joint lever (4)
• the clamp (5)
• the connecting plate (6)

2nd fitting :

• remove the gearbox control relay lever (3) (7)