Exhausts, Air filters and the like.......
Jussi
Posts: 614 Joined: Mon Jun 03, 2002 1:00 am
Location: Finland
Post
by Jussi » Tue Apr 08, 2003 12:45 pm
I'm thinking about 17" wheels on my cc.
Is it possible to fit Alessio Imola 17"s on cc ?
My wheel-dealer says it's impossible, but i have seen pictures about cc and imola's (it wasn't dreaming
).
In my opinion Imola's are one of the best looking wheels on cc !
[url=http://www.peugeot206cc.co.uk/newowners?id=351]Owner 351[/url]
paul_y3k
Posts: 2422 Joined: Thu May 09, 2002 1:00 am
Location: Swindon
Post
by paul_y3k » Tue Apr 08, 2003 12:47 pm
they will need an offset of 28
Angry Paul !
http://www.weebl.jolt.co.uk/angry.htm
Jussi
Posts: 614 Joined: Mon Jun 03, 2002 1:00 am
Location: Finland
Post
by Jussi » Wed Apr 09, 2003 5:02 am
What about the wheel width? Will 7,5" fit ?
I'm not sure are there any Imolas 7,0"*17". I'm not wanting to cut any pieces from my car to fit larger wheels. So will 7,5" width wheels fit
:
[url=http://www.peugeot206cc.co.uk/newowners?id=351]Owner 351[/url]
Erm
Posts: 4430 Joined: Thu Dec 06, 2001 1:00 am
Location: North London
Post
by Erm » Wed Apr 09, 2003 8:35 am
yes they fit........
i have 7.5 x 18 and have no problems so u will be fine with 7.5x17
MMMMmmmmmm V-TEC u gotta love it :)
Jussi
Posts: 614 Joined: Mon Jun 03, 2002 1:00 am
Location: Finland
Post
by Jussi » Wed Apr 09, 2003 9:18 am
Standard CC and 7,5*18 ???
Have you cut any pieces from car to fit those wheels ?
So i can order Alessio Imolas and they fit without any problem
[url=http://www.peugeot206cc.co.uk/newowners?id=351]Owner 351[/url]
Erm
Posts: 4430 Joined: Thu Dec 06, 2001 1:00 am
Location: North London
Post
by Erm » Wed Apr 09, 2003 9:36 am
nothing needs cutting.......
the arches on a CC are big and have plenty of room.
Only when u start lowering by 60mm you would have to cut bits off.......as long as u can get the correct offset they will be fine
MMMMmmmmmm V-TEC u gotta love it :)
Jussi
Posts: 614 Joined: Mon Jun 03, 2002 1:00 am
Location: Finland
Post
by Jussi » Wed Apr 09, 2003 12:09 pm
Allright, offset was 28, like Paul said.
Thanks !
[url=http://www.peugeot206cc.co.uk/newowners?id=351]Owner 351[/url]