Portal » Forum   FAQ   Search  
Register  Login
Portal » Forum 206CC Forums 206CC General

What size torx bit for head bolts 206cc 1.6

Anything related to the 206CC

What size torx bit for head bolts 206cc 1.6

Postby Fihen » Mon Mar 23, 2020 7:01 am

Hi all can anyone tell me what six torx bit I will need to take head bolts out. I suspect my engine has a blown head gasket so I an going to investigate. I have not started the job yet and was told I will need a rather large torx bit.
Any help greatly appreciated otherwise will have to wait for the arrival of the new head bolts.
User avatar
Fihen
 
Posts: 50
Joined: Tue Jul 17, 2018 5:40 am
Location: Denmark,Western Australia

Re: What size torx bit for head bolts 206cc 1.6

Postby IanL » Wed Mar 25, 2020 8:50 am

The Peugeot Service Box describes the cylinder head bolts as 10x150-117. The bolt socket is listed as 0185, but that may be the PSA Part No. rather than the size.

I hope that helps.
IanL
 
Posts: 1297
Joined: Wed May 13, 2015 10:34 pm
Location: Jersey, Channel Islands

Re: What size torx bit for head bolts 206cc 1.6

Postby gazza82 » Thu Mar 26, 2020 1:37 pm

Just had a look on 206info and it suggests E-14 on one thread ..

There are a few Torx headed bolts on a 206 so buying a set might be a better bet ..
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Alfa Romeo MiTo, Renault Clio II 1.5dCi
User avatar
gazza82
 
Posts: 2029
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK


Return to 206CC General

Who is online

Users browsing this forum: No registered users and 1 guest