Hi
All of a sudden i have got a leak from the timing side crankshaft pulley oil seal..
Is it as easy as removing auxilary belt , and remove cambelt , also remove crankshaft pulley.
Stab the crankshaft oil seal and replace? ..
I have replaced the cambelt ,water pump and head gasket a few weeks ago..
so im hoping the leak is not from the gasket...
Regards
Steve
Replacing crankshaft seal
Re: Replacing crankshaft seal
Yes that's pretty much it
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
Re: Replacing crankshaft seal
Rather than stab it, drill a tiny hole in it first then screw in a self tapper, the screw will hit metal and push the seal out easily for you.
2003 03'reg Peugeot 206cc 1997cc Manual