Accelerator Pedal Issue
-
- Posts: 7
- Joined: Mon Jun 29, 2020 7:15 pm
Accelerator Pedal Issue
Hi my accelerator pedal is lower than all the other pedals. It can be lifted higher but it always falls lower. It doesnt over rev but it means that when you fully accelerate it touches the floor. Could this just be the throttle cable that needs adjusting?
Re: Accelerator Pedal Issue
Check the clip on the end of the cable if it is a 2.0 16v. It has ribs to allow adjustment.
Peugeot 206 CC 2L 16V 4cyl 2002. QX 3 5W40 Oil. Lamps 80% LED. 5% HID.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
-
- Posts: 7
- Joined: Mon Jun 29, 2020 7:15 pm
Re: Accelerator Pedal Issue
Hi yes it is a 2.0 engine .. where are the ribs? in the engine?
Re: Accelerator Pedal Issue
Look at the cable where it goes to the throttle body. the clip is a zinc coloured deal.
I can take a picture if you want?
I can take a picture if you want?
Peugeot 206 CC 2L 16V 4cyl 2002. QX 3 5W40 Oil. Lamps 80% LED. 5% HID.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Re: Accelerator Pedal Issue
You do not have the required permissions to view the files attached to this post.
Peugeot 206 CC 2L 16V 4cyl 2002. QX 3 5W40 Oil. Lamps 80% LED. 5% HID.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
-
- Posts: 7
- Joined: Mon Jun 29, 2020 7:15 pm
Re: Accelerator Pedal Issue
ah mine doesnt look quite like that! I did wonder why I couldnt see it, it's because it doesnt have the clip bit. . . will the whole thing need replacing?
You do not have the required permissions to view the files attached to this post.
Re: Accelerator Pedal Issue
Probably just the clip .. you should be able to pull that sliding piece with the slots/ribs up right now .. a thin tie-wrap might be a temp fix.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo
-
- Posts: 7
- Joined: Mon Jun 29, 2020 7:15 pm
Re: Accelerator Pedal Issue
that it definitely it.. any ideas where i might get one from?
Re: Accelerator Pedal Issue
Car breakers? Peugeot?
Peugeot 206 CC 2L 16V 4cyl 2002. QX 3 5W40 Oil. Lamps 80% LED. 5% HID.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
-
- Posts: 7
- Joined: Mon Jun 29, 2020 7:15 pm
Re: Accelerator Pedal Issue
Thanks for the help all sorted now
Re: Accelerator Pedal Issue
Happy days!
I have just adjusted mine one more notch after cleaning the throttle body. More power! LOL.
I have just adjusted mine one more notch after cleaning the throttle body. More power! LOL.
Peugeot 206 CC 2L 16V 4cyl 2002. QX 3 5W40 Oil. Lamps 80% LED. 5% HID.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.
Triumph GT6 CC 2L5 12V 6Cyl 1972. QX 3 5W40 Oil. Lamps 98% LED.
G6SBH.
Siemens Controls & SW Engineer.