What size torx bit for head bolts 206cc 1.6

[Fihen]

Hi all can anyone tell me what six torx bit I will need to take head bolts out. I suspect my engine has a blown head gasket so I an going to investigate. I have not started the job yet and was told I will need a rather large torx bit.
Any help greatly appreciated otherwise will have to wait for the arrival of the new head bolts.

[IanL]

The Peugeot Service Box describes the cylinder head bolts as 10x150-117. The bolt socket is listed as 0185, but that may be the PSA Part No. rather than the size.

I hope that helps.

[gazza82]

Just had a look on 206info and it suggests E-14 on one thread ..

There are a few Torx headed bolts on a 206 so buying a set might be a better bet ..