Portal » Forum   FAQ   Search  
Register  Login
Portal » Forum 206CC Forums 206CC General

Sump gasket

Anything related to the 206CC

Sump gasket

Postby Rick33 » Mon Jan 27, 2020 3:20 pm

Hi all I need to replace my sump gasket
On a 53 reg. 1600. 16 v petrol
Is it easy to do
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby Capncol » Tue Jan 28, 2020 11:24 am

Not too bad. Drop the exhaust, and make sure gasket surfaces are clean and dry (best to leave the sump off overnight and let residual oil drip out before cleaning)
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
User avatar
Capncol
 
Posts: 3736
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Sump gasket

Postby Rick33 » Thu Jan 30, 2020 11:47 am

Thank you
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby gazza82 » Thu Jan 30, 2020 12:51 pm

Is it a gasket or is it sealant?
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Alfa Romeo MiTo, Renault Clio II 1.5dCi
User avatar
gazza82
 
Posts: 2030
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK

Re: Sump gasket

Postby Rick33 » Fri Jan 31, 2020 12:51 pm

Some one has used red sealant before. On it . I haven't taken it off yet
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby Capncol » Fri Jan 31, 2020 9:58 pm

Sump has been off before? Make sure you check oil pump pick-up is clear. Over enthusiastic application of sealer ends up in there.
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
User avatar
Capncol
 
Posts: 3736
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Sump gasket

Postby Rick33 » Fri Apr 03, 2020 5:39 pm

Hi I haven’t done all the bolts on my sump , and drop the exhaust but I can only get it to come down about an inch that is the sump do I need to remove the rear engine mount bracket ,
As there is not a lot of room between the bracket and the sump , And when I phoned Peugeot they give me a a rubber gasket for the sump, There doesn’t seem to be any recess for the rubber gasket to sitting .?
Any help would be appreciated thank you
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby Rick33 » Fri Apr 03, 2020 5:45 pm

Hi I have removed all the nuts and bolts from my sump dropped the exhaust it’s come down about an inch ,
There is not a lot of room between the sump and the rear engine mount do I have to remove the rear engine mount to drop the sump ,
When I phoned Peugeot they give me a gasket for my sump but I cannot see any recess for it to fit in is that the case any help would be appreciated thank you
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby Capncol » Fri Apr 03, 2020 7:59 pm

Haven't done one for a while, but i can only remember taking exhaust off. If I get a chance, I can have a look tomorrow at our sump.
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
User avatar
Capncol
 
Posts: 3736
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Sump gasket

Postby Rick33 » Fri Apr 03, 2020 8:31 pm

Thank you
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am

Re: Sump gasket

Postby Rick33 » Fri Apr 03, 2020 8:34 pm

On the rubber sump gasket do you think I just sandwich it between the two and just tighten all the bolts up
?
Rick33
 
Posts: 13
Joined: Sun Dec 01, 2019 8:21 am


Return to 206CC General

Who is online

Users browsing this forum: No registered users and 0 guests