Portal » Forum   FAQ   Search  
Register  Login
Portal » Forum 206CC Forums Modifications Styling

Correct wheel stud Question?

Bodykits, alloy bits'n'pieces etc etc

Correct wheel stud Question?

Postby Spitfire6 » Wed Dec 23, 2015 7:23 pm

Hi,
I have OEM alloys on my car.
Today I spent 600 quid for MOT and now I have vibration; This will be for another thread.

I removed 6 wheel studs and only two were the same. One is tapered. One is tapered with a washer. One is not tapered. One is tapered with two washers. One has a tapered washer. One has a different AF Hex.

And there are about three different lengths!!! LOL.

So, my problem is what are the correct type and length for my wheels so I can buy some and then get my other problems sorted.

Any help with links will be gratefully accepted.

Thanks,
Iain.
You do not have the required permissions to view the files attached to this post.
Peugeot 206 CC 2L 16V 4cyl 2002. Mobil 1 FS 0W40 Oil. Lamps 80% LED.
Triumph GT6 CC 2L5 12V 6Cyl 1972. Mobil 1 FS 0W40 Oil. Lamps 96% LED.
G6SBH.
S7 Engineer.
User avatar
Spitfire6
 
Posts: 201
Joined: Sat Nov 22, 2014 4:47 pm
Location: Great Britain

Re: Correct wheel stud Question?

Postby gazza82 » Wed Dec 23, 2015 9:03 pm

Nimrods have the bolts with flat captive washers ... These look ok

http://m.ebay.co.uk/itm/4-M12-x-1-25-35mm-PEUGEOT-GENUINE-ALLOY-WHEEL-BOLTS-FLAT-SEAT-WASHER-406-407-607-/140899203032?nav=SEARCH

they were 17mm heads for the smaller 14" nimrods on our hatchback

The dealer wasn't expensive when I bought 12 new ones a few years ago
Last edited by gazza82 on Thu Dec 24, 2015 12:49 am, edited 1 time in total.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Alfa Romeo MiTo, Renault Clio II 1.5dCi
User avatar
gazza82
 
Posts: 1991
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK

Re: Correct wheel stud Question?

Postby Spitfire6 » Thu Dec 24, 2015 12:10 am

Hi,
Many thanks.
I had used the search but any EBay link was too old to show.

You have shown me the beast I need.
Cheers,
Iain.

P.S It also means the chamfer only ones are way wrong!
Peugeot 206 CC 2L 16V 4cyl 2002. Mobil 1 FS 0W40 Oil. Lamps 80% LED.
Triumph GT6 CC 2L5 12V 6Cyl 1972. Mobil 1 FS 0W40 Oil. Lamps 96% LED.
G6SBH.
S7 Engineer.
User avatar
Spitfire6
 
Posts: 201
Joined: Sat Nov 22, 2014 4:47 pm
Location: Great Britain

Re: Correct wheel stud Question?

Postby gazza82 » Thu Dec 24, 2015 12:48 am

Chamfer only are for steel wheels.

Incidentally fit steels and the washers sit proud of the wherl and the chamfered face fits the wheel ... Dual-purpose bolts.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Alfa Romeo MiTo, Renault Clio II 1.5dCi
User avatar
gazza82
 
Posts: 1991
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK


Return to Styling

Who is online

Users browsing this forum: No registered users and 1 guest