Hello,
I have a issue where the drivers window when closing the door (with the roof already up) seems to be slightly to high and kind of pops out starting at the curve on the windscreen which then leaves a gap between the roof and the back window.
Only way to close that gap is to either push it in so goes under the ledge or if I am in the car I can lower then raise the window and it pops back, which I cant of course do when I am exiting the car.
I think the issue is that the window is going about 1 millimetre to high for it to just get under the ledge and was wondering if I take the door card off if there is a small adjustment I could make to stop it going so high?
Thanks
Drew
Window Allignment
- Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: Window Allignment
Yes the guides are on slots so you can loosen bolts and move it around until it aligns then tighten bolts to keep it there.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.