Hi guys, appreciate any advice, yesterday jumped started my 206 verve after leaving lights on and flattening battery. Jump started successfully but as l pulled away it went into limp mode. I stopped, switch off ignition for a min or two. Restarted the engine, drives fine but engine management light is now on?
I don't have a code reader, is there anything I can do without taking it to garage?
Engine Management light on after jump start
-
- Posts: 4
- Joined: Sun Feb 09, 2020 5:15 pm
Re: Engine Management light on after jump start
There is nothing to be done without a code reader, preferably Peugeot Planet.
Re: Engine Management light on after jump start
You may find after several engine start/run cycles, the light will go out. Worth a try.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.