Search found 2116 matches

by gazza82
Tue Jan 23, 2024 7:19 pm
Forum: 206CC General
Topic: Panels hard to find new
Replies: 2
Views: 1032

Re: Panels hard to find new

Only place I used for 206 panels has also gone out of business. It's probably second-hand now or an expert panel beater. Make sure you get the correct wings as some do not have the extra fairing around the wheel arch and don't line up properly with the bumper .. they might be the same as the hatchba...
by gazza82
Tue Dec 26, 2023 5:49 pm
Forum: 206CC General
Topic: Instrument Cluster - Replacement
Replies: 2
Views: 1713

Re: Instrument Cluster - Replacement

After 2001 Peugeot moved to the multiplex (CanBus) system so you need to get the right version as they are NOT interchangable.

Multiplex/Canbus uses the same wire for multiple uses so doesn't need as many.

One of the labels on the rear should ave the part number .. you will need to match that.
by gazza82
Mon Dec 11, 2023 8:39 pm
Forum: Other
Topic: Gearbox and clutch problems
Replies: 1
Views: 1279

Re: Gearbox and clutch problems

Sounds like you may have a leak on the clutch slave cylinder. Pumping it to work possibly means air in the system, but you could simply try bleeding it first. Brake/clutch fluid needs to be changed every few years as it attracts moisture from the air which in turn means it compresses more easily and...
by gazza82
Thu Sep 21, 2023 10:57 pm
Forum: 206CC General
Topic: Error code - p1160
Replies: 2
Views: 2447

Re: Error code - p1160

Depends a lot on which code reader you use ..

Peugeots (and Citroen) really need PlanetPeugeot or a PSA specific code reader. Otherwise you end up chasing a code that isn't the correct one ..
by gazza82
Sun Jul 09, 2023 11:17 am
Forum: Monkey Forum
Topic: I know GrandadMoney is a big fan ..
Replies: 1
Views: 3721

I know GrandadMoney is a big fan ..

... of the "Chicks" .. who were known as The Dixie Chicks until a few years ago ... they are his avatar! (They LOOK different to that image now, especially Well saw them twice over the past few days at BST Hyde Park ... two sets were same, just in a different order. Sorry Ron, we didn't go...
by gazza82
Fri Jun 30, 2023 5:55 pm
Forum: 206CC General
Topic: Lights, bells, and whistles.
Replies: 2
Views: 1618

Re: Lights, bells, and whistles.

Problem using a cheap scanner is that is rarely reports the right codes. So you could be changing parts that you don't need to. I had to buy a Sealey PSA specific one to get to the bottom of a couple of our Pug's issues. They are NLA so the only real option is to possibly try and get hold of an old ...
by gazza82
Fri Mar 03, 2023 6:49 pm
Forum: Roof
Topic: Roof doesn't work. Nothing happened.
Replies: 6
Views: 7541

Re: Roof doesn't work. Nothing happened.

When ours packed up the roof switch had fried itself.

You have checked the retractable-away cover in the boot too? Sometimes it's the most obvious ... )check also the small micro-switch in the cover catch)
by gazza82
Mon Jan 02, 2023 6:22 pm
Forum: Electrical
Topic: Engine temp arrow showing wrong
Replies: 6
Views: 7745

Re: Engine temp arrow showing wrong

Did you solve your problem as my gauge is on about 80-85 when car first started then goes to sound 105 when driving only a very short distance maybe two miles but when Bonnet opened there is no heat in compartment? Sounds like the temp sender. Had that on our 1.4. Car kept saying it was overheating...
by gazza82
Wed Oct 19, 2022 3:50 pm
Forum: Stuff for sale
Topic: CC Phase 2 Rear Lights
Replies: 3
Views: 6513

Re: CC Phase 2 Rear Lights

Bump!

A quick look on ebay shows these going for £30 each .. plus postage. They transform the rear of an older CC ..
by gazza82
Sun Sep 04, 2022 8:32 pm
Forum: Other
Topic: Lower control arm replacement.
Replies: 4
Views: 2727

Re: Lower control arm replacement.

I've done several arms in this way and it will go down low enough ... I agree the proper CC arms are harder due to the stiffer bushes (same as the GTi arms) ... I just cursed and sweated a bit more!! There is a factory-tool to do the same thin but you operate it at the side near the hub/discs. It ho...
by gazza82
Sat Sep 03, 2022 11:54 pm
Forum: Other
Topic: Lower control arm replacement.
Replies: 4
Views: 2727

Re: Lower control arm replacement.

I used a length of 2x3 timber .. wedged the end under the floor and pushed the arm down with the length of timber. I managed to push it down with a leg but you could use an assistant's boot! Also try and wedge a small chisel or wide flat screwdriver in the slot of the ball-joint opening as it can be...
by gazza82
Sun Aug 21, 2022 7:58 pm
Forum: 206CC General
Topic: Removing automatic gear selector knob
Replies: 1
Views: 2846

Re: Removing automatic gear selector knob

Don't know about the auto but the manual gear lever knob needed to be turned 90 degrees first ...
by gazza82
Wed Jul 20, 2022 5:58 pm
Forum: Roof
Topic: Engine hesitates between 2000 and 2100 rpm.
Replies: 3
Views: 2096

Re: Engine hesitates between 2000 and 2100 rpm.

Check the coil pack isn't one that doesn't like NGK spark plugs either (think it's the Sagem version).
by gazza82
Fri Jul 01, 2022 5:24 pm
Forum: Stuff for sale
Topic: CC Phase 2 Rear Lights
Replies: 3
Views: 6513

Re: CC Phase 2 Rear Lights

Bump!
by gazza82
Thu Jun 23, 2022 10:43 pm
Forum: Electrical
Topic: Key not programming
Replies: 7
Views: 2535

Re: Key not programming

I bought my Lexia kit of aliexpress ... and the CD had more viruses than intensive care in 2021!