If your seats are worn why not search round the breakers yards for a pair in good condition, plenty in yards nowadays plus they will probably cost you less than getting yours recovered. The ones in red and black leather are particularly nice.

I have fitted 206 Gti seats into a CC, no difference in the runner spacing, cant see why the bolster's would be any different if the seats are similar i.e leather or half leather etc, obviously the bolster's are slightly different on a low model with cheap cloth seats but not by a massive amount. HTH

Now Sold, although not on here, 'tis a very quiet forum nowadays, maybe the 206CC has had its day?, certainly in this area we hardly see them anymore.

Set of four in good condition, pretty scarce to find a set of these for the CC, finished in silver, very easy to fit, can post anywhere in UK. These are the wider ones, there is a version that are very slim. Great little mod that will transform the look of your 206. £40 posted. http://i.imgur.com/wS...

Still have all switches available folks, also roof pump, hydraulic rams etc etc. Piyas.. depending on which switch they can be either open or closed.

There is also another train of thought.. its his car and he can do whatever he likes with it (providing its not endangering anyone else). Like Capricol says it can be done, not something i would bother with right enough. Be interesting to hear if you manage to do it.

Lizzy, if you position your head right below the latch with good lighting, open and close it a few times you will be able to see the part of the latch which opens and closes the microswitch, quite often the switch is stuck down and wont spring open when you unlatch, often all thats required is a bit...

Hi folks, just a heads up for anyone looking for any CC parts, virtually anything you need for your CC i will probably have including panels /hydraulic rams/roof ecu/pump/cables/latches,etc etc etc, and everything will be tested fastidiously before sending!, (have 2 CC's on the road which will be us...

Good shout Col, It actually turned out to be the right side hydraulic ram was leaking slightly, enough to prevent the required force to lift the boot lid, but not enough (yet) to register as being low in the pump, replaced the ram (really simple job) and refilled the pump, roof working again, all go...

No, just the sound of the pump Ian, nothing actually moves, then it is deceased!.

Goes like this....boot blind in place, windows all down, undo the latches, bong is heard, operate the roof switch and the pump runs for a few seconds then stops, nothing else happens from there, no beeps, no display warnings etc, pump oil is up to level, u clips inside the boot lid are orientated in...

the crash detection is in the ecu itself next to the gear stick, the side air bags in the seats are seperate and have a sensor for each in the sill under the carpet. Front impact will not necessarily set off the seat bags and side impact will not necessarily set off the front bags, or the opposite ...

Possibly for the side airbags Col, but where are the ones for the front airbags, have checked everything behind the front bumper / inner wings etc, nothing apparent.

Does anyone know the location of the crash sensors on a 206CC 1.6?, I have read that some models may have their sensors located within the Airbag control module itself, most information i can glean from the net however states the the crash sensors on a 206 are located at various locations on the car...

dbdbdb wrote:Thank you for your help. It's all working as it should thanks to you.

Great stuff Dan, glad its fixed, now you can enjoy the Sun if it appears . If you need anything else just let me know, got piles of CC stuff and super cheap!.