Goodafternoon,
Looking of the the torque settings of the engine, like main bearings, big ends, half casing engine block, flywheel.
Engine is dv6ted4 1.6 hdi,
Thanks in advance
Search found 7 matches
- Sun Sep 23, 2018 1:44 pm
- Forum: 206CC General
- Topic: torque settings
- Replies: 0
- Views: 3616
- Thu Apr 13, 2017 8:25 pm
- Forum: Roof
- Topic: roof issue
- Replies: 5
- Views: 4747
Re: roof issue
The speed of the hydraulic pump is not measured, its the info from the engine running relay..
- Wed Apr 12, 2017 9:19 pm
- Forum: Roof
- Topic: roof issue
- Replies: 5
- Views: 4747
Re: roof issue
Problem solved, the "motor running" relay was not installed, after putting a new one in, the roof opens and close as normal.
The only question is why this circuit is important, it has nothing to do with a moving or standing car, thats where the speedsensor circuit is for..
See picture:
The only question is why this circuit is important, it has nothing to do with a moving or standing car, thats where the speedsensor circuit is for..
See picture:
- Tue Apr 11, 2017 10:48 pm
- Forum: Roof
- Topic: roof issue
- Replies: 5
- Views: 4747
roof issue
206 diagram.jpg After reset the roof ecu, and drive the car some distance, permanent fault comes back, and roof won,t open or close, when open. With pp 2000 get this failure ( no info motor rev,s ) speedsensor is working as i can see the moving speed in pp 2000 program. The following diagram is sho...
- Tue May 24, 2016 9:34 pm
- Forum: Roof
- Topic: Microswitch roof - shelf
- Replies: 5
- Views: 3878
Re: Microswitch roof - shelf
Problem solved, after moving / stopping the car the roof works, the mentioned switch have in closed situation a +/- 2 k,ohm resistence, strange becouse all the other switches go,s to 0 ohm, ( looks like a build in resistor, but don,t think so, either a bad contact ) But anyway the roof works with th...
- Sat May 14, 2016 10:52 pm
- Forum: Roof
- Topic: Microswitch roof - shelf
- Replies: 5
- Views: 3878
Microswitch roof - shelf
Goodevening, Have a 206 cc here with some issues, clutch, missing parts, and the roof not working, it moved 3 times, after that the beep when you pull or press the switch, Windows only opens with the 2 ( left and right ) switches. Checked the microswitches, and the wiring, and found out that one on ...
- Sat May 14, 2016 10:10 pm
- Forum: Introductions & Welcome Messages
- Topic: New on this forum
- Replies: 2
- Views: 3224
New on this forum
Best regards from Costa Blanca Spain